This is the latest recevied telemetry packets stored in our database for station/object TA7FTH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1719843906 | 0 Pkt | 46 Pkt | 0 Pkt | -66 dBm | 3.83 V |
1719842980 | 0 Pkt | 68 Pkt | 0 Pkt | -66 dBm | 3.83 V |
1719842051 | 0 Pkt | 62 Pkt | 0 Pkt | -58 dBm | 3.83 V |
1719841124 | 0 Pkt | 64 Pkt | 0 Pkt | -64 dBm | 3.86 V |
1719840199 | 0 Pkt | 69 Pkt | 0 Pkt | -62 dBm | 3.86 V |
1719839272 | 0 Pkt | 61 Pkt | 0 Pkt | -60 dBm | 3.83 V |
1719838344 | 0 Pkt | 58 Pkt | 0 Pkt | -59 dBm | 3.83 V |
1719837417 | 0 Pkt | 57 Pkt | 0 Pkt | -61 dBm | 3.86 V |
1719836491 | 0 Pkt | 48 Pkt | 0 Pkt | -59 dBm | 3.86 V |
1719835566 | 0 Pkt | 58 Pkt | 0 Pkt | -58 dBm | 3.83 V |
1719834638 | 0 Pkt | 66 Pkt | 0 Pkt | -58 dBm | 3.86 V |
1719833710 | 0 Pkt | 77 Pkt | 0 Pkt | -59 dBm | 3.86 V |
1719832780 | 0 Pkt | 77 Pkt | 0 Pkt | -56 dBm | 3.83 V |
1719831853 | 0 Pkt | 48 Pkt | 0 Pkt | -58 dBm | 3.86 V |
1719830928 | 0 Pkt | 48 Pkt | 0 Pkt | -58 dBm | 3.86 V |
1719830003 | 0 Pkt | 48 Pkt | 0 Pkt | -55 dBm | 3.86 V |
1719829079 | 0 Pkt | 60 Pkt | 0 Pkt | -53 dBm | 3.83 V |
1719828153 | 0 Pkt | 51 Pkt | 0 Pkt | -55 dBm | 3.83 V |
1719827229 | 0 Pkt | 37 Pkt | 0 Pkt | -63 dBm | 3.83 V |
1719826535 | 0 Pkt | 2 Pkt | 0 Pkt | -55 dBm | 3.86 V |
1719825861 | 0 Pkt | 51 Pkt | 0 Pkt | -61 dBm | 3.88 V |
1719824936 | 0 Pkt | 52 Pkt | 0 Pkt | -54 dBm | 3.86 V |
1719824010 | 0 Pkt | 47 Pkt | 0 Pkt | -55 dBm | 3.86 V |
1719823086 | 0 Pkt | 65 Pkt | 0 Pkt | -56 dBm | 3.86 V |
1719822159 | 0 Pkt | 70 Pkt | 0 Pkt | -56 dBm | 3.86 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)