APRS Track Direct

My position About ☰

reset

TA4TX Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA4TX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732572449	7 Pkt	0 Pkt	0 Pkt	-72 dBm	12.33 V
1732570627	3 Pkt	0 Pkt	0 Pkt	-69 dBm	12.33 V
1732568803	0 Pkt	0 Pkt	0 Pkt	-69 dBm	12.35 V
1732566981	3 Pkt	0 Pkt	0 Pkt	-69 dBm	12.35 V
1732565159	2 Pkt	0 Pkt	0 Pkt	-68 dBm	12.35 V
1732563336	1 Pkt	4 Pkt	0 Pkt	-67 dBm	12.35 V
1732561514	2 Pkt	5 Pkt	1 Pkt	-69 dBm	12.33 V
1732559692	6 Pkt	6 Pkt	2 Pkt	-69 dBm	12.35 V
1732557869	0 Pkt	6 Pkt	0 Pkt	-68 dBm	12.33 V
1732556047	3 Pkt	6 Pkt	2 Pkt	-68 dBm	12.33 V
1732554225	5 Pkt	6 Pkt	2 Pkt	-68 dBm	12.33 V
1732552402	10 Pkt	6 Pkt	2 Pkt	-68 dBm	12.33 V
1732550579	6 Pkt	6 Pkt	4 Pkt	-69 dBm	12.26 V
1732548757	5 Pkt	6 Pkt	1 Pkt	-69 dBm	12.26 V
1732546934	7 Pkt	5 Pkt	2 Pkt	-67 dBm	12.33 V
1732545112	2 Pkt	0 Pkt	0 Pkt	-66 dBm	12.33 V
1732543290	0 Pkt	0 Pkt	0 Pkt	-68 dBm	12.33 V
1732541468	0 Pkt	0 Pkt	0 Pkt	-68 dBm	12.35 V
1732539648	0 Pkt	0 Pkt	0 Pkt	-65 dBm	12.37 V
1732537824	0 Pkt	0 Pkt	0 Pkt	-65 dBm	12.3 V
1732536002	0 Pkt	0 Pkt	0 Pkt	-67 dBm	12.33 V
1732534180	2 Pkt	0 Pkt	0 Pkt	-68 dBm	12.35 V
1732532358	2 Pkt	0 Pkt	0 Pkt	-66 dBm	12.35 V
1732530536	2 Pkt	0 Pkt	0 Pkt	-65 dBm	12.35 V
1732528713	2 Pkt	0 Pkt	0 Pkt	-66 dBm	12.35 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)