APRS Track Direct

My position About ☰

reset

VK1KCM-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK1KCM-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1750204304	0.03 Rx Erlang	0 Tx Erlang	31 count/10m	1 count/10m	3 count/10m
1750203104	0.04 Rx Erlang	0 Tx Erlang	33 count/10m	1 count/10m	3 count/10m
1750201904	0.03 Rx Erlang	0 Tx Erlang	33 count/10m	1 count/10m	3 count/10m
1750200704	0.04 Rx Erlang	0 Tx Erlang	38 count/10m	3 count/10m	2 count/10m
1750199504	0.04 Rx Erlang	0 Tx Erlang	36 count/10m	2 count/10m	3 count/10m
1750198304	0.04 Rx Erlang	0 Tx Erlang	40 count/10m	1 count/10m	2 count/10m
1750197104	0.03 Rx Erlang	0 Tx Erlang	43 count/10m	0 count/10m	2 count/10m
1750195904	0.04 Rx Erlang	0 Tx Erlang	35 count/10m	2 count/10m	3 count/10m
1750194704	0.04 Rx Erlang	0 Tx Erlang	38 count/10m	0 count/10m	2 count/10m
1750193504	0.03 Rx Erlang	0 Tx Erlang	32 count/10m	0 count/10m	3 count/10m
1750192304	0.03 Rx Erlang	0 Tx Erlang	28 count/10m	0 count/10m	2 count/10m
1750191104	0.02 Rx Erlang	0 Tx Erlang	25 count/10m	0 count/10m	2 count/10m
1750189904	0.03 Rx Erlang	0 Tx Erlang	30 count/10m	0 count/10m	3 count/10m
1750188704	0.04 Rx Erlang	0 Tx Erlang	32 count/10m	1 count/10m	2 count/10m
1750187504	0.03 Rx Erlang	0 Tx Erlang	35 count/10m	0 count/10m	3 count/10m
1750186304	0.04 Rx Erlang	0 Tx Erlang	35 count/10m	0 count/10m	2 count/10m
1750185104	0.03 Rx Erlang	0 Tx Erlang	25 count/10m	0 count/10m	3 count/10m
1750183904	0.03 Rx Erlang	0 Tx Erlang	26 count/10m	0 count/10m	3 count/10m
1750182704	0.03 Rx Erlang	0 Tx Erlang	29 count/10m	0 count/10m	2 count/10m
1750181504	0.03 Rx Erlang	0 Tx Erlang	27 count/10m	0 count/10m	2 count/10m
1750180304	0.03 Rx Erlang	0 Tx Erlang	28 count/10m	0 count/10m	3 count/10m
1750179104	0.03 Rx Erlang	0 Tx Erlang	25 count/10m	0 count/10m	2 count/10m
1750177904	0.02 Rx Erlang	0 Tx Erlang	22 count/10m	0 count/10m	3 count/10m
1750176704	0.03 Rx Erlang	0 Tx Erlang	31 count/10m	1 count/10m	2 count/10m
1750175504	0.04 Rx Erlang	0 Tx Erlang	33 count/10m	0 count/10m	3 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)