This is the latest recevied telemetry packets stored in our database for station/object CA2RXU-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732289158 | 300 | 0 | 0 | 0 | 0 |
| 1732288981 | 300 | 0 | 0 | 0 | 0 |
| 1732288898 | 300 | 0 | 0 | 0 | 0 |
| 1732288791 | 300 | 0 | 0 | 0 | 0 |
| 1732288730 | 300 | 0 | 0 | 0 | 0 |
| 1732288363 | 420 | 0 | 0 | 0 | 0 |
| 1732287633 | 331 | 0 | 0 | 0 | 0 |
| 1732286727 | 332 | 0 | 0 | 0 | 0 |
| 1732285823 | 334 | 0 | 0 | 0 | 0 |
| 1732284916 | 335 | 0 | 0 | 0 | 0 |
| 1732284011 | 336 | 0 | 0 | 0 | 0 |
| 1732283105 | 337 | 0 | 0 | 0 | 0 |
| 1732282199 | 338 | 0 | 0 | 0 | 0 |
| 1732281294 | 338 | 0 | 0 | 0 | 0 |
| 1732280389 | 339 | 0 | 0 | 0 | 0 |
| 1732279483 | 340 | 0 | 0 | 0 | 0 |
| 1732278578 | 341 | 0 | 0 | 0 | 0 |
| 1732277672 | 342 | 0 | 0 | 0 | 0 |
| 1732276766 | 343 | 0 | 0 | 0 | 0 |
| 1732275861 | 344 | 0 | 0 | 0 | 0 |
| 1732274955 | 344 | 0 | 0 | 0 | 0 |
| 1732274050 | 345 | 0 | 0 | 0 | 0 |
| 1732273144 | 345 | 0 | 0 | 0 | 0 |
| 1732272239 | 346 | 0 | 0 | 0 | 0 |
| 1732271334 | 346 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)