APRS Track Direct

My position About ☰

reset

YH1RIX-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YH1RIX-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Humid*	Press*	Volt*
1786747812	39.14 C	34.12 %	1001.18 hPa	13.8 V
1786747212	36.67 C	38.82 %	1001.18 hPa	13.65 V
1786746912	39.14 C	34.9 %	1001.18 hPa	13.73 V
1786746611	36.67 C	38.82 %	1001.18 hPa	13.73 V
1786746012	38.86 C	34.9 %	1001.18 hPa	13.73 V
1786745411	39.96 C	33.33 %	1001.18 hPa	13.8 V
1786745111	38.59 C	35.69 %	1001.18 hPa	13.73 V
1786744512	39.69 C	33.33 %	1001.18 hPa	13.73 V
1786744212	38.04 C	36.47 %	1001.18 hPa	13.73 V
1786743911	35.57 C	41.18 %	1001.18 hPa	13.8 V
1786743611	39.69 C	33.73 %	1001.18 hPa	13.73 V
1786743311	37.76 C	37.25 %	1001.18 hPa	13.73 V
1786743011	35.29 C	41.96 %	1000.39 hPa	13.65 V
1786742411	36.94 C	38.43 %	1000.39 hPa	13.73 V
1786742111	36.12 C	39.61 %	1000.39 hPa	13.65 V
1786741811	38.86 C	34.9 %	1000.39 hPa	13.8 V
1786741511	36.39 C	39.61 %	1000.39 hPa	13.73 V
1786741212	39.96 C	33.33 %	1000.39 hPa	13.65 V
1786740611	35.84 C	40.78 %	1000.39 hPa	13.8 V
1786740311	39.69 C	33.73 %	1000.39 hPa	13.73 V
1786739711	35.02 C	42.35 %	1000.39 hPa	13.65 V
1786739411	39.41 C	34.12 %	1000.39 hPa	13.73 V
1786739111	37.22 C	38.04 %	1000.39 hPa	13.73 V
1786738811	35.84 C	40.39 %	1000.39 hPa	13.65 V
1786738211	36.39 C	39.61 %	1000.39 hPa	13.8 V

*Used Equation Coefficients:

Water: 0, 1, 0

Temp: 0, 0.27451, -10

Humid: 0, 0.392157, 0

Press: 0, 0.784314, 900

Volt: 0, 0.078431, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)