This is the latest recevied telemetry packets stored in our database for station/object KNAPPA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1749327062 | 62.32 | 2.79 | 61.03 | 0.56 | 77 |
| 1749326403 | 62.67 | 1.66 | 61.27 | 0.53 | 77 |
| 1749326102 | 62.79 | 1.21 | 61.17 | 0.56 | 77 |
| 1749325442 | 63.05 | 0.76 | 61.45 | 0.54 | 77 |
| 1749324782 | 62.78 | 1.85 | 61.58 | 0.5 | 77 |
| 1749324122 | 63.1 | 1.1 | 61.36 | 0.53 | 77 |
| 1749323462 | 62.89 | 2.72 | 61.42 | 0.51 | 77 |
| 1749322803 | 63.19 | 1.93 | 61.33 | 0.5 | 77 |
| 1749322502 | 63.21 | 1.79 | 61.2 | 0.48 | 78 |
| 1749321842 | 64.18 | 0.76 | 62.18 | 0.51 | 78 |
| 1749321182 | 64.23 | 2.31 | 62.65 | 0.58 | 79 |
| 1749320522 | 64.11 | 4.57 | 62.82 | 0.72 | 80 |
| 1749319862 | 63.49 | 7.38 | 16.17 | 9.09 | 82 |
| 1749319203 | 62.76 | 10.64 | 14.61 | 8.17 | 81 |
| 1749318901 | 62.82 | 10.9 | 14.59 | 8.02 | 81 |
| 1749318242 | 61.33 | 11.98 | 14.49 | 6.23 | 81 |
| 1749317582 | 65.8 | 11.49 | 14.66 | 9.71 | 80 |
| 1749316922 | 60.94 | 13.23 | 14.41 | 4.28 | 79 |
| 1749316262 | 58.05 | 12.07 | 14.39 | 3.68 | 77 |
| 1749315603 | 58.32 | 10.52 | 14.41 | 3.14 | 77 |
| 1749315302 | 58.22 | 10.7 | 14.35 | 3.21 | 76 |
| 1749314642 | 59.21 | 10.55 | 14.37 | 3.06 | 75 |
| 1749313982 | 63.13 | 8.33 | 14.29 | 2.2 | 75 |
| 1749313322 | 60.67 | 9.61 | 14.27 | 1.78 | 75 |
| 1749312662 | 59.19 | 1.88 | 14.25 | 1.59 | 75 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)