This is the latest recevied telemetry packets stored in our database for station/object SQ8JIU-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx10m* | Dg1h* | Eff1h* | Temp* |
---|---|---|---|---|---|
1719659659 | 12.6 Volt | 18 Pkt | 0 Pkt | 98 Pcnt | 5 C |
1719659059 | 12.6 Volt | 21 Pkt | 0 Pkt | 98 Pcnt | 5 C |
1719658459 | 12.6 Volt | 11 Pkt | 0 Pkt | 98 Pcnt | 5 C |
1719657859 | 12.6 Volt | 20 Pkt | 0 Pkt | 98 Pcnt | 5 C |
1719657259 | 12.6 Volt | 17 Pkt | 0 Pkt | 99 Pcnt | 5 C |
1719656659 | 12.6 Volt | 16 Pkt | 1 Pkt | 99 Pcnt | 5 C |
1719656067 | 12.53 Volt | 26 Pkt | 0 Pkt | 98 Pcnt | 5 C |
1719655459 | 12.53 Volt | 23 Pkt | 0 Pkt | 98 Pcnt | 5 C |
1719654859 | 12.53 Volt | 14 Pkt | 1 Pkt | 98 Pcnt | 5 C |
1719654259 | 12.53 Volt | 26 Pkt | 0 Pkt | 98 Pcnt | 5 C |
1719653659 | 12.53 Volt | 22 Pkt | 1 Pkt | 99 Pcnt | 5 C |
1719653059 | 12.53 Volt | 29 Pkt | 0 Pkt | 99 Pcnt | 5 C |
1719652459 | 12.53 Volt | 20 Pkt | 0 Pkt | 100 Pcnt | 5 C |
1719651859 | 12.53 Volt | 33 Pkt | 0 Pkt | 100 Pcnt | 5 C |
1719651259 | 12.53 Volt | 11 Pkt | 1 Pkt | 98 Pcnt | 5 C |
1719650659 | 12.53 Volt | 21 Pkt | 0 Pkt | 99 Pcnt | 5 C |
1719650059 | 12.53 Volt | 23 Pkt | 1 Pkt | 99 Pcnt | 5 C |
1719649459 | 12.53 Volt | 22 Pkt | 0 Pkt | 99 Pcnt | 5 C |
1719648859 | 12.53 Volt | 20 Pkt | 0 Pkt | 98 Pcnt | 5 C |
1719648259 | 12.53 Volt | 28 Pkt | 0 Pkt | 97 Pcnt | 5 C |
1719647659 | 12.53 Volt | 21 Pkt | 1 Pkt | 97 Pcnt | 5 C |
1719647059 | 12.53 Volt | 23 Pkt | 0 Pkt | 97 Pcnt | 5 C |
1719646459 | 12.53 Volt | 32 Pkt | 1 Pkt | 97 Pcnt | 5 C |
1719645859 | 12.53 Volt | 19 Pkt | 0 Pkt | 97 Pcnt | 5 C |
1719645259 | 12.53 Volt | 21 Pkt | 0 Pkt | 97 Pcnt | 5 C |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx10m: 0, 1, 0
Dg1h: 0, 1, 0
Eff1h: 0, 1, 0
Temp: 0, 0, 5
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)