This is the latest recevied telemetry packets stored in our database for station/object 9ATEST-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794847887 | 149 | 169 | 215 | 224 | 210 |
| 1794847765 | 149 | 169 | 215 | 224 | 209 |
| 1794847703 | 149 | 169 | 215 | 224 | 209 |
| 1794847642 | 149 | 169 | 215 | 224 | 210 |
| 1794847581 | 149 | 169 | 215 | 230 | 211 |
| 1794847519 | 149 | 169 | 215 | 224 | 210 |
| 1794847458 | 149 | 169 | 215 | 224 | 209 |
| 1794847397 | 149 | 169 | 215 | 230 | 212 |
| 1794847334 | 149 | 169 | 215 | 224 | 210 |
| 1794847274 | 149 | 169 | 215 | 230 | 212 |
| 1794847212 | 149 | 169 | 215 | 224 | 224 |
| 1794847150 | 149 | 169 | 215 | 230 | 211 |
| 1794847089 | 149 | 169 | 215 | 230 | 210 |
| 1794847025 | 149 | 169 | 215 | 224 | 211 |
| 1794846964 | 149 | 169 | 215 | 230 | 210 |
| 1794846901 | 149 | 169 | 215 | 230 | 212 |
| 1794846839 | 149 | 169 | 215 | 230 | 212 |
| 1794846716 | 149 | 169 | 215 | 224 | 211 |
| 1794846655 | 149 | 169 | 215 | 230 | 216 |
| 1794846593 | 149 | 169 | 215 | 224 | 223 |
| 1794846532 | 149 | 169 | 215 | 230 | 216 |
| 1794846409 | 149 | 169 | 215 | 224 | 210 |
| 1794846348 | 149 | 169 | 215 | 224 | 209 |
| 1794846287 | 149 | 169 | 215 | 224 | 209 |
| 1794846225 | 149 | 169 | 215 | 224 | 209 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)