APRS Track Direct

My position About ☰

reset

WB2QGZ-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WB2QGZ-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*	InetiGate*
1790646373	159 Pkts	152 Pkts	33 Pkts	20 C	1 Pkts
1790642774	158 Pkts	147 Pkts	33 Pkts	20 C	0 Pkts
1790639173	127 Pkts	122 Pkts	40 Pkts	20 C	0 Pkts
1790635573	145 Pkts	139 Pkts	28 Pkts	20 C	0 Pkts
1790631973	115 Pkts	110 Pkts	32 Pkts	20 C	0 Pkts
1790628373	141 Pkts	135 Pkts	41 Pkts	20 C	0 Pkts
1790624773	225 Pkts	217 Pkts	59 Pkts	20 C	0 Pkts
1790621173	237 Pkts	228 Pkts	70 Pkts	20 C	0 Pkts
1790617573	221 Pkts	214 Pkts	71 Pkts	20 C	0 Pkts
1790613973	249 Pkts	239 Pkts	83 Pkts	20 C	0 Pkts
1790610373	229 Pkts	223 Pkts	61 Pkts	20 C	0 Pkts
1790606773	187 Pkts	180 Pkts	43 Pkts	20 C	0 Pkts
1790603173	174 Pkts	167 Pkts	37 Pkts	20 C	0 Pkts
1790599573	192 Pkts	184 Pkts	52 Pkts	20 C	0 Pkts
1790595973	169 Pkts	161 Pkts	52 Pkts	20 C	0 Pkts
1790592373	205 Pkts	195 Pkts	53 Pkts	20 C	0 Pkts
1790588773	127 Pkts	121 Pkts	40 Pkts	20 C	0 Pkts
1790585174	115 Pkts	111 Pkts	33 Pkts	21 C	0 Pkts
1790581573	109 Pkts	104 Pkts	34 Pkts	20 C	0 Pkts
1790577973	109 Pkts	107 Pkts	33 Pkts	20 C	0 Pkts
1790574373	120 Pkts	117 Pkts	34 Pkts	20 C	0 Pkts
1790570774	93 Pkts	89 Pkts	30 Pkts	20 C	0 Pkts
1790567173	98 Pkts	95 Pkts	27 Pkts	20 C	0 Pkts
1790563573	100 Pkts	93 Pkts	34 Pkts	20 C	0 Pkts

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)