This is the latest recevied telemetry packets stored in our database for station/object EA4RCR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Pressure* | Battery* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1745348531 | 20 | 944 | 4 | 0 | 0 |
| 1745347930 | 20 | 944 | 4 | 0 | 0 |
| 1745347330 | 20 | 944 | 4 | 0 | 0 |
| 1745346730 | 20 | 944 | 4 | 0 | 0 |
| 1745346130 | 20 | 944 | 4 | 0 | 0 |
| 1745345530 | 20 | 944 | 4 | 0 | 0 |
| 1745344929 | 20 | 944 | 4 | 0 | 0 |
| 1745344329 | 20 | 944 | 4 | 0 | 0 |
| 1745343729 | 20 | 944 | 4 | 0 | 0 |
| 1745343129 | 20 | 944 | 4 | 0 | 0 |
| 1745342529 | 20 | 944 | 4 | 0 | 0 |
| 1745341929 | 21 | 943 | 4 | 0 | 0 |
| 1745341329 | 20 | 943 | 4 | 0 | 0 |
| 1745340729 | 20 | 943 | 4 | 0 | 0 |
| 1745340129 | 20 | 943 | 4 | 0 | 0 |
| 1745339528 | 20 | 943 | 4 | 0 | 0 |
| 1745338928 | 20 | 943 | 4 | 0 | 0 |
| 1745338328 | 20 | 943 | 4 | 0 | 0 |
| 1745337728 | 20 | 943 | 4 | 0 | 0 |
| 1745337128 | 20 | 943 | 4 | 0 | 0 |
| 1745336528 | 20 | 943 | 4 | 0 | 0 |
| 1745335928 | 20 | 943 | 4 | 0 | 0 |
| 1745335328 | 20 | 943 | 4 | 0 | 0 |
| 1745334727 | 20 | 943 | 4 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Pressure: 0, 1, 0
Battery: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)