APRS Track Direct

My position About ☰

reset

HS6NDK-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6NDK-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1749326881	0 Pkt	0 Pkt	-68 dBm	13.21 V
1749325957	0 Pkt	0 Pkt	-67 dBm	13.06 V
1749325032	0 Pkt	0 Pkt	-67 dBm	13.21 V
1749324108	0 Pkt	0 Pkt	-69 dBm	13.21 V
1749323183	0 Pkt	1 Pkt	-69 dBm	13.21 V
1749322259	0 Pkt	1 Pkt	-67 dBm	13.21 V
1749321334	0 Pkt	0 Pkt	-66 dBm	13.21 V
1749320410	0 Pkt	0 Pkt	-67 dBm	13.21 V
1749319485	0 Pkt	0 Pkt	-66 dBm	13.21 V
1749318561	0 Pkt	1 Pkt	-66 dBm	13.21 V
1749317636	6 Pkt	0 Pkt	-67 dBm	13.21 V
1749316712	5 Pkt	0 Pkt	-66 dBm	13.21 V
1749315787	2 Pkt	0 Pkt	-66 dBm	13.21 V
1749314863	0 Pkt	0 Pkt	-67 dBm	13.08 V
1749313938	3 Pkt	0 Pkt	-68 dBm	13.21 V
1749313014	6 Pkt	0 Pkt	-67 dBm	13.21 V
1749312089	3 Pkt	0 Pkt	-68 dBm	13.21 V
1749311165	0 Pkt	1 Pkt	-65 dBm	13.21 V
1749310240	0 Pkt	0 Pkt	-66 dBm	13.21 V
1749309316	0 Pkt	0 Pkt	-65 dBm	13.21 V
1749308391	5 Pkt	0 Pkt	-68 dBm	13.21 V
1749307467	1 Pkt	0 Pkt	-68 dBm	13.21 V
1749306542	9 Pkt	0 Pkt	-68 dBm	13.19 V
1749305617	8 Pkt	3 Pkt	-68 dBm	13.21 V
1749304692	2 Pkt	0 Pkt	-68 dBm	13.21 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)