This is the latest recevied telemetry packets stored in our database for station/object BU2GE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | CPUTemp* | RxPkts/20m* | RxPkts/1h* | RxPkts/24h* | DiGi* |
---|---|---|---|---|---|
1720016090 | 37.7 C | 21 p | 77 p | 2276 p | 0 p |
1720014890 | 37.7 C | 22 p | 76 p | 2275 p | 0 p |
1720013690 | 38.2 C | 34 p | 77 p | 2280 p | 0 p |
1720012490 | 38.5 C | 20 p | 92 p | 2274 p | 0 p |
1720011290 | 37.9 C | 23 p | 120 p | 2288 p | 0 p |
1720010090 | 37.8 C | 49 p | 135 p | 2319 p | 0 p |
1720008890 | 38.2 C | 48 p | 130 p | 2308 p | 0 p |
1720007690 | 37.4 C | 38 p | 131 p | 2307 p | 0 p |
1720006490 | 38.8 C | 44 p | 119 p | 2313 p | 0 p |
1720005290 | 37.6 C | 49 p | 98 p | 2306 p | 0 p |
1720004090 | 38 C | 26 p | 80 p | 2303 p | 0 p |
1720002890 | 37.9 C | 23 p | 98 p | 2323 p | 0 p |
1720001690 | 37.9 C | 31 p | 106 p | 2339 p | 0 p |
1720000490 | 38.8 C | 44 p | 102 p | 2348 p | 0 p |
1719999290 | 38 C | 31 p | 95 p | 2352 p | 0 p |
1719998090 | 37.9 C | 27 p | 94 p | 2356 p | 0 p |
1719996890 | 38 C | 37 p | 87 p | 2352 p | 0 p |
1719995690 | 38 C | 30 p | 90 p | 2342 p | 0 p |
1719994490 | 38.2 C | 20 p | 93 p | 2335 p | 0 p |
1719993290 | 37.8 C | 40 p | 123 p | 2341 p | 0 p |
1719992090 | 39 C | 33 p | 153 p | 2338 p | 0 p |
1719990890 | 39 C | 50 p | 167 p | 2331 p | 0 p |
1719989690 | 39 C | 70 p | 152 p | 2313 p | 0 p |
1719988491 | 39 C | 47 p | 112 p | 2268 p | 0 p |
1719987290 | 38.6 C | 35 p | 99 p | 2247 p | 0 p |
*Used Equation Coefficients:
CPUTemp: 0, 1, 0
RxPkts/20m: 0, 1, 0
RxPkts/1h: 0, 1, 0
RxPkts/24h: 0, 1, 0
DiGi: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)