This is the latest recevied telemetry packets stored in our database for station/object DF5RJ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Humi* | Baro* | Value4* | Value5* |
---|---|---|---|---|---|
1719844272 | 17.3 deg C | 75 % | 1012.1 hPa | 0 | 0 |
1719843371 | 18.7 deg C | 71.4 % | 1011.2 hPa | 0 | 0 |
1719842471 | 18.6 deg C | 71.6 % | 1011.3 hPa | 0 | 0 |
1719841571 | 20.4 deg C | 64.5 % | 1010.8 hPa | 0 | 0 |
1719840671 | 21.6 deg C | 56.2 % | 1010.3 hPa | 0 | 0 |
1719839771 | 21.8 deg C | 56.4 % | 1010.4 hPa | 0 | 0 |
1719839442 | 21.8 deg C | 56 % | 1010.5 hPa | 0 | 0 |
1719838542 | 21.2 deg C | 58.1 % | 1010.9 hPa | 0 | 0 |
1719837642 | 21 deg C | 59.1 % | 1011.3 hPa | 0 | 0 |
1719836742 | 20.8 deg C | 58 % | 1011.4 hPa | 0 | 0 |
1719835841 | 21.5 deg C | 55.9 % | 1011.4 hPa | 0 | 0 |
1719834941 | 20.8 deg C | 56.7 % | 1011.7 hPa | 0 | 0 |
1719834041 | 21.8 deg C | 57.5 % | 1011.5 hPa | 0 | 0 |
1719833141 | 21.6 deg C | 57.5 % | 1011.6 hPa | 0 | 0 |
1719832241 | 21.1 deg C | 59.5 % | 1011.6 hPa | 0 | 0 |
1719831341 | 19.7 deg C | 62.4 % | 1012.2 hPa | 0 | 0 |
1719830441 | 19.6 deg C | 64.2 % | 1012.5 hPa | 0 | 0 |
1719829541 | 19.4 deg C | 64.6 % | 1012.6 hPa | 0 | 0 |
1719828641 | 20.9 deg C | 60.5 % | 1012.2 hPa | 0 | 0 |
1719827740 | 18.8 deg C | 66.1 % | 1012.8 hPa | 0 | 0 |
1719827409 | 19.6 deg C | 63.4 % | 1012.6 hPa | 0 | 0 |
1719826509 | 19.6 deg C | 63.6 % | 1012.7 hPa | 0 | 0 |
1719825609 | 19.7 deg C | 64.5 % | 1012.6 hPa | 0 | 0 |
1719824709 | 21.6 deg C | 58.9 % | 1012.3 hPa | 0 | 0 |
1719823809 | 21 deg C | 62.9 % | 1012.4 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)