This is the latest recevied telemetry packets stored in our database for station/object PU5RIS-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719426906 | 0 | 0 | 90 | 5 | 140 |
1719426015 | 0 | 0 | 90 | 10 | 140 |
1719425159 | 0 | 0 | 90 | 9 | 140 |
1719424620 | 0 | 0 | 89 | 8 | 140 |
1719423727 | 0 | 0 | 89 | 8 | 140 |
1719422836 | 0 | 0 | 89 | 8 | 140 |
1719421942 | 0 | 0 | 88 | 6 | 140 |
1719421051 | 0 | 0 | 88 | 9 | 140 |
1719420157 | 0 | 0 | 88 | 6 | 140 |
1719419264 | 0 | 0 | 88 | 12 | 140 |
1719418370 | 0 | 0 | 87 | 9 | 140 |
1719417476 | 0 | 0 | 87 | 10 | 140 |
1719416581 | 0 | 0 | 87 | 6 | 140 |
1719415689 | 0 | 0 | 87 | 11 | 140 |
1719414793 | 0 | 0 | 86 | 7 | 140 |
1719413901 | 0 | 0 | 86 | 9 | 140 |
1719413008 | 0 | 0 | 86 | 4 | 140 |
1719412116 | 0 | 0 | 86 | 9 | 140 |
1719411219 | 0 | 0 | 85 | 5 | 140 |
1719410328 | 0 | 0 | 85 | 6 | 140 |
1719409434 | 0 | 0 | 85 | 4 | 140 |
1719408543 | 0 | 0 | 85 | 13 | 140 |
1719407648 | 0 | 0 | 84 | 14 | 140 |
1719406755 | 0 | 0 | 84 | 10 | 140 |
1719405860 | 0 | 0 | 84 | 15 | 140 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)