This is the latest recevied telemetry packets stored in our database for station/object HS4KGC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1718711420 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 18.07 V |
1718710795 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 17.72 V |
1718710169 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 18.03 V |
1718709544 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 17.92 V |
1718708919 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 18.03 V |
1718708294 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 18.09 V |
1718707669 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 17.82 V |
1718707043 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 18.27 V |
1718706418 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 17.76 V |
1718705793 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 18.11 V |
1718705168 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 17.66 V |
1718704543 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 17.92 V |
1718703917 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 17.88 V |
1718703293 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 17.76 V |
1718702668 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 17.39 V |
1718702043 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 17.35 V |
1718701418 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 17.58 V |
1718700792 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 17.43 V |
1718700167 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 17.35 V |
1718699541 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 17.06 V |
1718698916 | 0 Pkt | 0 Pkt | 0 Pkt | -39 dBm | 17.47 V |
1718698291 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 17.19 V |
1718697665 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 17.23 V |
1718697040 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 16.73 V |
1718696415 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 16.63 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)