This is the latest recevied telemetry packets stored in our database for station/object SA3VCC-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1749327037 | 145 | 79 | 12 | 999 | 0 |
| 1749325827 | 145 | 79 | 13 | 999 | 0 |
| 1749324618 | 145 | 79 | 13 | 999 | 0 |
| 1749322200 | 146 | 80 | 14 | 999 | 0 |
| 1749320990 | 146 | 80 | 14 | 999 | 0 |
| 1749319781 | 146 | 80 | 14 | 999 | 0 |
| 1749318573 | 146 | 80 | 14 | 999 | 0 |
| 1749317364 | 146 | 80 | 15 | 999 | 0 |
| 1749316156 | 146 | 80 | 16 | 999 | 0 |
| 1749314951 | 146 | 80 | 20 | 999 | 0 |
| 1749313738 | 147 | 81 | 20 | 999 | 0 |
| 1749312528 | 147 | 81 | 21 | 999 | 0 |
| 1749311318 | 148 | 81 | 20 | 999 | 0 |
| 1749310107 | 148 | 81 | 18 | 999 | 0 |
| 1749308897 | 148 | 81 | 18 | 999 | 0 |
| 1749307688 | 148 | 81 | 18 | 999 | 0 |
| 1749306479 | 148 | 81 | 18 | 999 | 0 |
| 1749305268 | 148 | 81 | 18 | 999 | 0 |
| 1749304059 | 148 | 81 | 19 | 999 | 0 |
| 1749302850 | 148 | 81 | 20 | 999 | 0 |
| 1749301640 | 148 | 81 | 21 | 999 | 0 |
| 1749300432 | 148 | 82 | 20 | 999 | 0 |
| 1749299223 | 148 | 81 | 19 | 999 | 0 |
| 1749298012 | 148 | 81 | 20 | 999 | 0 |
| 1749296803 | 148 | 81 | 18 | 999 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)