This is the latest recevied telemetry packets stored in our database for station/object DL5DAE-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Humi* | Baro* | Value4* | Value5* |
---|---|---|---|---|---|
1719426286 | 33.6 deg C | 44.4 % | 1012.9 hPa | 0 | 0 |
1719425386 | 33.6 deg C | 44.6 % | 1012.7 hPa | 0 | 0 |
1719424486 | 33.6 deg C | 44.9 % | 1011.2 hPa | 0 | 0 |
1719423586 | 33.6 deg C | 45 % | 1011.1 hPa | 0 | 0 |
1719422685 | 33.6 deg C | 45.3 % | 1011 hPa | 0 | 0 |
1719421785 | 33.6 deg C | 46.2 % | 1011.1 hPa | 0 | 0 |
1719420885 | 33.6 deg C | 46.3 % | 1011.2 hPa | 0 | 0 |
1719419985 | 33.5 deg C | 46.5 % | 1011.2 hPa | 0 | 0 |
1719419085 | 33.4 deg C | 46.5 % | 1011.3 hPa | 0 | 0 |
1719418185 | 33.3 deg C | 47 % | 1011.3 hPa | 0 | 0 |
1719417285 | 33.2 deg C | 47.4 % | 1011.3 hPa | 0 | 0 |
1719416952 | 33.2 deg C | 47.3 % | 1011.3 hPa | 0 | 0 |
1719416052 | 33 deg C | 47.2 % | 1011.4 hPa | 0 | 0 |
1719415152 | 32.9 deg C | 47.5 % | 1011.5 hPa | 0 | 0 |
1719414252 | 32.7 deg C | 47.8 % | 1011.6 hPa | 0 | 0 |
1719413352 | 32.6 deg C | 47.6 % | 1011.7 hPa | 0 | 0 |
1719412452 | 32.4 deg C | 47.2 % | 1011.9 hPa | 0 | 0 |
1719411552 | 32.2 deg C | 47.9 % | 1011.9 hPa | 0 | 0 |
1719410652 | 32 deg C | 48.9 % | 1012.1 hPa | 0 | 0 |
1719409752 | 31.9 deg C | 49.1 % | 1012.3 hPa | 0 | 0 |
1719408852 | 31.7 deg C | 49.5 % | 1012.4 hPa | 0 | 0 |
1719407951 | 31.5 deg C | 49.3 % | 1012.7 hPa | 0 | 0 |
1719407051 | 31.3 deg C | 49.2 % | 1012.7 hPa | 0 | 0 |
1719406151 | 31.2 deg C | 49.5 % | 1013.1 hPa | 0 | 0 |
1719405251 | 31 deg C | 49.5 % | 1013.2 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)