This is the latest recevied telemetry packets stored in our database for station/object YO8B-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TRX* | Shelter* | Exterior* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1744957265 | 11.7 °C | 28.4 °C | 11.6 °C | 0 | 0 |
| 1744956665 | 11.2 °C | 29.3 °C | 11.6 °C | 0 | 0 |
| 1744956066 | 11 °C | 30.4 °C | 10.9 °C | 0 | 0 |
| 1744955466 | 10.9 °C | 29.5 °C | 11 °C | 0 | 0 |
| 1744954866 | 10.6 °C | 30.4 °C | 11.1 °C | 0 | 0 |
| 1744954265 | 10.3 °C | 28 °C | 10.4 °C | 0 | 0 |
| 1744953665 | 10.1 °C | 28.9 °C | 10.2 °C | 0 | 0 |
| 1744953065 | 9.9 °C | 30.2 °C | 10.1 °C | 0 | 0 |
| 1744952466 | 9.6 °C | 32 °C | 9.9 °C | 0 | 0 |
| 1744951866 | 9.4 °C | 33.3 °C | 9.5 °C | 0 | 0 |
| 1744951266 | 9.1 °C | 35 °C | 9.4 °C | 0 | 0 |
| 1744950666 | 8.8 °C | 34.1 °C | 8.9 °C | 0 | 0 |
| 1744950065 | 8.6 °C | 37.1 °C | 8.9 °C | 0 | 0 |
| 1744949465 | 8.4 °C | 29.9 °C | 8.9 °C | 0 | 0 |
| 1744948865 | 8.1 °C | 32 °C | 8.6 °C | 0 | 0 |
| 1744948265 | 7.8 °C | 34.9 °C | 8.4 °C | 0 | 0 |
| 1744947666 | 7.6 °C | 39.2 °C | 8.3 °C | 0 | 0 |
| 1744947066 | 7.4 °C | 31.6 °C | 8.3 °C | 0 | 0 |
| 1744946466 | 7.2 °C | 28.3 °C | 8 °C | 0 | 0 |
| 1744945865 | 7.1 °C | 22.9 °C | 8.1 °C | 0 | 0 |
| 1744945265 | 7.1 °C | 22.1 °C | 7.6 °C | 0 | 0 |
| 1744944665 | 7.1 °C | 22.2 °C | 7.6 °C | 0 | 0 |
| 1744944065 | 7.1 °C | 22.2 °C | 8.1 °C | 0 | 0 |
| 1744943466 | 7.1 °C | 22.1 °C | 7.4 °C | 0 | 0 |
| 1744942866 | 7.1 °C | 22 °C | 7.7 °C | 0 | 0 |
*Used Equation Coefficients:
TRX: 0, 1, -100
Shelter: 0, 1, -100
Exterior: 0, 1, -100
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)