This is the latest recevied telemetry packets stored in our database for station/object K1EQX-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1732267456 | 14.1 Volt | 1110 Pkt | 380 Pkt | 55 Pcnt | 0 None |
| 1732265656 | 14.1 Volt | 1150 Pkt | 390 Pkt | 57 Pcnt | 0 None |
| 1732263853 | 14.1 Volt | 1180 Pkt | 370 Pkt | 58 Pcnt | 0 None |
| 1732262055 | 14.1 Volt | 1200 Pkt | 380 Pkt | 59 Pcnt | 0 None |
| 1732260251 | 14.1 Volt | 1190 Pkt | 380 Pkt | 57 Pcnt | 0 None |
| 1732258447 | 14.1 Volt | 1210 Pkt | 380 Pkt | 56 Pcnt | 0 None |
| 1732256646 | 14.1 Volt | 1250 Pkt | 380 Pkt | 57 Pcnt | 0 None |
| 1732254847 | 14.1 Volt | 1260 Pkt | 370 Pkt | 58 Pcnt | 0 None |
| 1732253047 | 14.1 Volt | 1210 Pkt | 380 Pkt | 57 Pcnt | 0 None |
| 1732251241 | 14.1 Volt | 1190 Pkt | 380 Pkt | 55 Pcnt | 0 None |
| 1732249440 | 14.1 Volt | 1150 Pkt | 350 Pkt | 53 Pcnt | 0 None |
| 1732247637 | 14.1 Volt | 1100 Pkt | 320 Pkt | 52 Pcnt | 0 None |
| 1732245835 | 14.1 Volt | 1130 Pkt | 370 Pkt | 52 Pcnt | 0 None |
| 1732244035 | 14.1 Volt | 1100 Pkt | 370 Pkt | 50 Pcnt | 0 None |
| 1732242232 | 14.1 Volt | 1080 Pkt | 320 Pkt | 50 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)