This is the latest recevied telemetry packets stored in our database for station/object HS3NOQ-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1836274145 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 0 % |
| 1836273984 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1766091229 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1766090317 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1766089405 | 0 Pkt | 0 Pkt | 2 Pkt | -65 dBm | 0 % |
| 1766088493 | 6 Pkt | 5 Pkt | 4 Pkt | -66 dBm | 0 % |
| 1766087580 | 0 Pkt | 0 Pkt | 1 Pkt | -64 dBm | 0 % |
| 1766086668 | 0 Pkt | 0 Pkt | 9 Pkt | -65 dBm | 0 % |
| 1766085755 | 2 Pkt | 0 Pkt | 4 Pkt | -65 dBm | 0 % |
| 1766084843 | 3 Pkt | 4 Pkt | 7 Pkt | -66 dBm | 0 % |
| 1766083930 | 0 Pkt | 0 Pkt | 10 Pkt | -64 dBm | 0 % |
| 1766083018 | 0 Pkt | 0 Pkt | 3 Pkt | -66 dBm | 0 % |
| 1766082106 | 4 Pkt | 2 Pkt | 5 Pkt | -65 dBm | 0 % |
| 1766081194 | 1 Pkt | 2 Pkt | 5 Pkt | -65 dBm | 0 % |
| 1766080281 | 0 Pkt | 0 Pkt | 2 Pkt | -65 dBm | 0 % |
| 1766079369 | 0 Pkt | 0 Pkt | 2 Pkt | -64 dBm | 0 % |
| 1766078457 | 6 Pkt | 4 Pkt | 4 Pkt | -65 dBm | 0 % |
| 1766077544 | 0 Pkt | 0 Pkt | 6 Pkt | -64 dBm | 0 % |
| 1766076631 | 0 Pkt | 0 Pkt | 5 Pkt | -66 dBm | 0 % |
| 1766075719 | 0 Pkt | 0 Pkt | 6 Pkt | -65 dBm | 0 % |
| 1766074807 | 4 Pkt | 6 Pkt | 16 Pkt | -65 dBm | 0 % |
| 1766073894 | 0 Pkt | 0 Pkt | 8 Pkt | -65 dBm | 0 % |
| 1766072981 | 0 Pkt | 0 Pkt | 12 Pkt | -66 dBm | 0 % |
| 1766072069 | 0 Pkt | 0 Pkt | 11 Pkt | -65 dBm | 0 % |
| 1766071156 | 6 Pkt | 3 Pkt | 10 Pkt | -65 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)