APRS Track Direct

My position About ☰

reset

N5DRP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N5DRP-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	A5*
1786784178	13.88 Volt	230 Pkt	50 Pkt	92 Pcnt	0 None
1786782379	13.88 Volt	200 Pkt	50 Pkt	92 Pcnt	0 None
1786780579	13.88 Volt	210 Pkt	70 Pkt	95 Pcnt	0 None
1786778779	13.88 Volt	240 Pkt	80 Pkt	96 Pcnt	0 None
1786776979	13.88 Volt	220 Pkt	70 Pkt	96 Pcnt	0 None
1786775179	13.88 Volt	210 Pkt	60 Pkt	95 Pcnt	0 None
1786773378	13.88 Volt	220 Pkt	70 Pkt	95 Pcnt	0 None
1786773328	-	-	-	-	-
1786771578	13.88 Volt	230 Pkt	90 Pkt	93 Pcnt	0 None
1786769780	13.88 Volt	250 Pkt	100 Pkt	92 Pcnt	0 None
1786767979	13.88 Volt	250 Pkt	80 Pkt	95 Pcnt	0 None
1786766179	13.88 Volt	230 Pkt	80 Pkt	92 Pcnt	0 None
1786766128	-	-	-	-	-
1786764379	13.88 Volt	300 Pkt	110 Pkt	93 Pcnt	0 None
1786760779	13.88 Volt	360 Pkt	140 Pkt	94 Pcnt	0 None
1786758980	13.88 Volt	360 Pkt	150 Pkt	95 Pcnt	0 None
1786758928	-	-	-	-	-
1786757180	13.88 Volt	370 Pkt	150 Pkt	95 Pcnt	0 None
1786755378	13.8 Volt	440 Pkt	160 Pkt	95 Pcnt	0 None
1786753579	13.88 Volt	460 Pkt	150 Pkt	95 Pcnt	0 None
1786751779	13.88 Volt	410 Pkt	160 Pkt	96 Pcnt	0 None
1786751729	-	-	-	-	-
1786749979	13.88 Volt	420 Pkt	170 Pkt	96 Pcnt	0 None
1786748180	13.88 Volt	450 Pkt	140 Pkt	92 Pcnt	0 None
1786746379	13.88 Volt	500 Pkt	110 Pkt	90 Pcnt	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)