This is the latest recevied telemetry packets stored in our database for station/object BX4ACP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | CPUTemp* | RxPkts/10m* | RxPkts/1h* | RxPkts/24h* | DiGi* |
---|---|---|---|---|---|
1719847597 | 42 C | 4 p | 22 p | 1070 p | 0 p |
1719846398 | 43 C | 5 p | 21 p | 1063 p | 0 p |
1719845197 | 43 C | 3 p | 20 p | 1055 p | 0 p |
1719843997 | 42 C | 4 p | 30 p | 1048 p | 0 p |
1719842797 | 43 C | 5 p | 33 p | 1042 p | 0 p |
1719841597 | 43 C | 7 p | 34 p | 1035 p | 0 p |
1719840397 | 44 C | 6 p | 25 p | 1018 p | 0 p |
1719839197 | 44 C | 5 p | 22 p | 1009 p | 0 p |
1719837998 | 45 C | 4 p | 28 p | 1001 p | 0 p |
1719836798 | 46 C | 4 p | 34 p | 993 p | 0 p |
1719835598 | 48 C | 8 p | 44 p | 987 p | 0 p |
1719834398 | 49 C | 7 p | 45 p | 973 p | 0 p |
1719833197 | 49 C | 10 p | 49 p | 959 p | 0 p |
1719831997 | 49 C | 9 p | 56 p | 943 p | 0 p |
1719830797 | 50 C | 11 p | 75 p | 928 p | 0 p |
1719829597 | 50 C | 15 p | 82 p | 910 p | 0 p |
1719828397 | 50 C | 16 p | 78 p | 887 p | 0 p |
1719827197 | 49 C | 13 p | 66 p | 853 p | 0 p |
1719825997 | 50 C | 12 p | 65 p | 828 p | 0 p |
1719824797 | 50 C | 17 p | 68 p | 809 p | 0 p |
1719823598 | 50 C | 9 p | 79 p | 787 p | 0 p |
1719822397 | 49 C | 11 p | 90 p | 763 p | 0 p |
1719821197 | 49 C | 21 p | 107 p | 741 p | 0 p |
1719819997 | 49 C | 21 p | 97 p | 708 p | 0 p |
1719818797 | 49 C | 22 p | 83 p | 673 p | 0 p |
*Used Equation Coefficients:
CPUTemp: 0, 1, 0
RxPkts/10m: 0, 1, 0
RxPkts/1h: 0, 1, 0
RxPkts/24h: 0, 1, 0
DiGi: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)