This is the latest recevied telemetry packets stored in our database for station/object MB7UHE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Cpu* | Temp* | FreeM* | RxP* | TxP* |
|---|---|---|---|---|---|
| 1732270985 | 0.09 Load | 50.15 DegC | 2109 Mb | 24075 Pkt | 23272 Pkt |
| 1732269185 | 0.07 Load | 47.4 DegC | 2115 Mb | 21391 Pkt | 20513 Pkt |
| 1732267384 | 0.05 Load | 49.6 DegC | 2117 Mb | 18747 Pkt | 16728 Pkt |
| 1732265585 | 0.12 Load | 46.85 DegC | 2115 Mb | 19310 Pkt | 17621 Pkt |
| 1732263784 | 0.11 Load | 49.05 DegC | 2114 Mb | 22750 Pkt | 21595 Pkt |
| 1732261984 | 0.17 Load | 46.85 DegC | 2117 Mb | 27170 Pkt | 27263 Pkt |
| 1732260185 | 0.15 Load | 47.4 DegC | 2116 Mb | 21404 Pkt | 19082 Pkt |
| 1732258384 | 0.22 Load | 47.4 DegC | 2118 Mb | 22498 Pkt | 21133 Pkt |
| 1732256585 | 0.04 Load | 46.85 DegC | 2119 Mb | 22155 Pkt | 20712 Pkt |
| 1732254785 | 0.04 Load | 49.6 DegC | 2120 Mb | 21863 Pkt | 20387 Pkt |
| 1732252984 | 0.05 Load | 47.4 DegC | 2119 Mb | 20353 Pkt | 18977 Pkt |
| 1732251185 | 0.08 Load | 48.5 DegC | 2117 Mb | 21997 Pkt | 20832 Pkt |
| 1732249385 | 0.09 Load | 46.3 DegC | 2118 Mb | 24116 Pkt | 23603 Pkt |
| 1732247584 | 0.13 Load | 47.95 DegC | 2120 Mb | 19257 Pkt | 17867 Pkt |
| 1732245785 | 0.09 Load | 47.4 DegC | 2126 Mb | 20273 Pkt | 18358 Pkt |
| 1732243985 | 0.1 Load | 49.05 DegC | 2123 Mb | 20611 Pkt | 19191 Pkt |
| 1732242184 | 0.12 Load | 47.4 DegC | 2124 Mb | 19590 Pkt | 17344 Pkt |
*Used Equation Coefficients:
Cpu: 0, 0.001, 0
Temp: 0, 0.001, 0
FreeM: 0, 1, 0
RxP: 0, 1, 0
TxP: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)