APRS Track Direct

My position About ☰

reset

E21TMW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E21TMW-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	WiFi*	BaudRate*
1790658586	0 Pkt	9 Pkt	48 dB	19200 bps
1790657986	5 Pkt	11 Pkt	49 dB	19200 bps
1790657386	0 Pkt	12 Pkt	49 dB	19200 bps
1790656804	1 Pkt	9 Pkt	47 dB	19200 bps
1790656186	0 Pkt	9 Pkt	50 dB	19200 bps
1790655586	0 Pkt	9 Pkt	50 dB	19200 bps
1790654986	0 Pkt	12 Pkt	50 dB	19200 bps
1790654408	0 Pkt	9 Pkt	49 dB	19200 bps
1790653786	0 Pkt	9 Pkt	49 dB	19200 bps
1790653186	0 Pkt	9 Pkt	49 dB	19200 bps
1790652586	0 Pkt	12 Pkt	49 dB	19200 bps
1790652014	0 Pkt	9 Pkt	48 dB	19200 bps
1790651386	0 Pkt	9 Pkt	50 dB	19200 bps
1790650786	0 Pkt	9 Pkt	50 dB	19200 bps
1790650186	0 Pkt	12 Pkt	50 dB	19200 bps
1790649609	0 Pkt	9 Pkt	50 dB	19200 bps
1790648986	0 Pkt	9 Pkt	50 dB	19200 bps
1790648386	0 Pkt	9 Pkt	51 dB	19200 bps
1790647786	0 Pkt	12 Pkt	51 dB	19200 bps
1790647213	0 Pkt	9 Pkt	52 dB	19200 bps
1790646586	0 Pkt	9 Pkt	51 dB	19200 bps
1790645986	1 Pkt	10 Pkt	51 dB	19200 bps
1790645386	2 Pkt	12 Pkt	50 dB	19200 bps
1790644811	2 Pkt	9 Pkt	51 dB	19200 bps
1790644186	12 Pkt	14 Pkt	50 dB	19200 bps

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

WiFi: 0, 1, 100

BaudRate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)