This is the latest recevied telemetry packets stored in our database for station/object KC3AOA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794863936 | 474 | 615 | 0 | 0 | 0 |
| 1794863931 | 475 | 615 | 0 | 0 | 0 |
| 1794863014 | 451 | 610 | 0 | 0 | 0 |
| 1794862739 | 447 | 607 | 0 | 0 | 0 |
| 1794862623 | 450 | 606 | 0 | 0 | 0 |
| 1794862372 | 451 | 604 | 0 | 0 | 0 |
| 1794862238 | 451 | 602 | 0 | 0 | 0 |
| 1794862118 | 457 | 600 | 0 | 0 | 0 |
| 1794861988 | 473 | 598 | 0 | 0 | 0 |
| 1794861899 | 450 | 596 | 0 | 0 | 0 |
| 1794861720 | 458 | 593 | 0 | 0 | 0 |
| 1794861600 | 469 | 590 | 0 | 0 | 0 |
| 1794861493 | 469 | 588 | 0 | 0 | 0 |
| 1794861475 | 464 | 587 | 0 | 0 | 0 |
| 1794861397 | 464 | 585 | 0 | 0 | 0 |
| 1794861333 | 463 | 584 | 0 | 0 | 0 |
| 1794861273 | 469 | 582 | 0 | 0 | 0 |
| 1794861243 | 468 | 581 | 0 | 0 | 0 |
| 1794826120 | 447 | 614 | 0 | 0 | 0 |
| 1794825893 | 444 | 612 | 0 | 0 | 0 |
| 1794825833 | 449 | 611 | 0 | 0 | 0 |
| 1794825810 | 452 | 611 | 0 | 0 | 0 |
| 1794825725 | 453 | 611 | 0 | 0 | 0 |
| 1794825611 | 450 | 609 | 0 | 0 | 0 |
| 1794825415 | 453 | 607 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)