This is the latest recevied telemetry packets stored in our database for station/object PA1MT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 04/16/2025 1:51:38 PM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 1:36:38 PM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 1:21:37 PM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 1:06:37 PM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 12:51:37 PM+00:00 | 413 | 0 | 0 | 0 | 0 |
| 04/16/2025 12:36:36 PM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 12:21:36 PM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 12:06:36 PM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 11:51:36 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 11:36:35 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 11:21:35 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 11:06:35 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 10:51:34 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 10:21:34 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 10:06:34 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 9:51:34 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 9:36:34 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 9:21:33 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 9:06:33 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 8:51:33 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 8:36:33 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 8:21:32 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 8:06:32 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 7:51:32 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
| 04/16/2025 7:36:32 AM+00:00 | 414 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)