APRS Track Direct

My position About ☰

reset

OE1TKS-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE1TKS-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	70+50Ah*	70+50Ah*	80Ah*	Netz*
1749322303	13.05 Volt	-1.8 Ampere	13.2 Volt	50 50 Hz
1749321943	13.05 Volt	-1.8 Ampere	13.2 Volt	50 50 Hz
1749321583	13.05 Volt	-1.6 Ampere	13.2 Volt	49.97 50 Hz
1749321223	13.05 Volt	-1.4 Ampere	13.2 Volt	50 50 Hz
1749320863	13.05 Volt	-1.6 Ampere	13.2 Volt	50 50 Hz
1749320503	13.05 Volt	-1.4 Ampere	13.2 Volt	50 50 Hz
1749320143	13.05 Volt	-1.4 Ampere	13.2 Volt	50 50 Hz
1749319783	13.05 Volt	-1.4 Ampere	13.2 Volt	50 50 Hz
1749319423	13.05 Volt	-1.4 Ampere	13.2 Volt	50.02 50 Hz
1749319063	13.05 Volt	-1.4 Ampere	13.2 Volt	50.01 50 Hz
1749318703	13.05 Volt	-1.4 Ampere	13.2 Volt	50 50 Hz
1749318343	13.13 Volt	-1.2 Ampere	13.2 Volt	49.97 50 Hz
1749317983	13.13 Volt	-1 Ampere	13.2 Volt	49.96 50 Hz
1749317623	13.13 Volt	-1 Ampere	13.2 Volt	50 50 Hz
1749317263	13.13 Volt	-0.8 Ampere	13.2 Volt	49.95 50 Hz
1749316903	13.13 Volt	-1 Ampere	13.2 Volt	50 50 Hz
1749316543	13.13 Volt	-0.8 Ampere	13.2 Volt	50.01 50 Hz
1749316183	13.13 Volt	-0.8 Ampere	13.2 Volt	50 50 Hz
1749315823	13.13 Volt	-0.2 Ampere	13.2 Volt	50.01 50 Hz
1749315463	13.13 Volt	-0.6 Ampere	13.2 Volt	50 50 Hz
1749315103	13.13 Volt	-0.8 Ampere	13.2 Volt	49.98 50 Hz
1749314743	13.13 Volt	-0.8 Ampere	13.2 Volt	50 50 Hz
1749314383	13.13 Volt	-1 Ampere	13.2 Volt	49.97 50 Hz
1749314023	13.13 Volt	-1.2 Ampere	13.2 Volt	50.01 50 Hz
1749313663	13.13 Volt	-1.4 Ampere	13.2 Volt	49.97 50 Hz

*Used Equation Coefficients:

70+50Ah: 0, 0.075, 0

70+50Ah: 0, 0.2, -25.6

80Ah: 0, 0.1, 0

80Ah: 0, 0.2, -25.6

Netz: 0, 0.0063, 49.853

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)