This is the latest recevied telemetry packets stored in our database for station/object DC4HF-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718712049 | 5178 | 7 | 0 | 0 | 0 |
1718711086 | 5171 | 7 | 0 | 0 | 0 |
1718710124 | 5175 | 7 | 0 | 0 | 0 |
1718709161 | 5173 | 7 | 0 | 0 | 0 |
1718708208 | 5171 | 7 | 0 | 0 | 0 |
1718707286 | 5147 | 7 | 0 | 0 | 0 |
1718706323 | 5150 | 7 | 0 | 0 | 0 |
1718705361 | 5144 | 7 | 0 | 0 | 0 |
1718704458 | 5153 | 7 | 0 | 0 | 0 |
1718703495 | 5140 | 7 | 0 | 0 | 0 |
1718702533 | 5142 | 7 | 0 | 0 | 0 |
1718701570 | 5153 | 7 | 0 | 0 | 0 |
1718700607 | 5122 | 7 | 0 | 0 | 0 |
1718699645 | 5142 | 7 | 0 | 0 | 0 |
1718698682 | 5124 | 7 | 0 | 0 | 0 |
1718697751 | 5117 | 7 | 0 | 0 | 0 |
1718696788 | 5119 | 7 | 0 | 0 | 0 |
1718695826 | 5116 | 7 | 0 | 0 | 0 |
1718694863 | 5113 | 7 | 0 | 0 | 0 |
1718693901 | 5118 | 7 | 0 | 0 | 0 |
1718692938 | 5116 | 7 | 0 | 0 | 0 |
1718691975 | 5111 | 7 | 0 | 0 | 0 |
1718691013 | 5109 | 7 | 0 | 0 | 0 |
1718690050 | 5115 | 7 | 0 | 0 | 0 |
1718689087 | 5113 | 7 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)