This is the latest recevied telemetry packets stored in our database for station/object YM3KB-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1719401098 | 0 Pkt | 171 Pkt | 0 Pkt | -51 dBm | 12.02 V |
1719400623 | 0 Pkt | 173 Pkt | 0 Pkt | -43 dBm | 12.02 V |
1719400143 | 0 Pkt | 113 Pkt | 0 Pkt | -45 dBm | 12 V |
1719399563 | 0 Pkt | 37 Pkt | 0 Pkt | -46 dBm | 12 V |
1719399408 | 0 Pkt | 160 Pkt | 0 Pkt | -50 dBm | 12 V |
1719388370 | 0 Pkt | 28 Pkt | 0 Pkt | -49 dBm | 12 V |
1719388040 | 0 Pkt | 173 Pkt | 0 Pkt | -44 dBm | 12 V |
1719386960 | 0 Pkt | 28 Pkt | 0 Pkt | -43 dBm | 12 V |
1719386527 | 0 Pkt | 158 Pkt | 0 Pkt | -50 dBm | 12 V |
1719384263 | 0 Pkt | 33 Pkt | 0 Pkt | -41 dBm | 12 V |
1719384090 | 0 Pkt | 134 Pkt | 0 Pkt | -47 dBm | 12 V |
1719383356 | 0 Pkt | 26 Pkt | 0 Pkt | -44 dBm | 12 V |
1719383214 | 0 Pkt | 35 Pkt | 0 Pkt | -44 dBm | 12 V |
1719381335 | 0 Pkt | 51 Pkt | 0 Pkt | -46 dBm | 12 V |
1719380362 | 0 Pkt | 34 Pkt | 0 Pkt | -45 dBm | 12 V |
1719379988 | 0 Pkt | 105 Pkt | 0 Pkt | -43 dBm | 12 V |
1719378845 | 0 Pkt | 6 Pkt | 0 Pkt | -46 dBm | 12 V |
1719378694 | 0 Pkt | 112 Pkt | 0 Pkt | -49 dBm | 12 V |
1719378266 | 0 Pkt | 40 Pkt | 0 Pkt | -45 dBm | 12 V |
1719378117 | 0 Pkt | 144 Pkt | 0 Pkt | -44 dBm | 12 V |
1719376761 | 0 Pkt | 34 Pkt | 0 Pkt | -45 dBm | 12 V |
1719376613 | 0 Pkt | 148 Pkt | 0 Pkt | -43 dBm | 12 V |
1719374363 | 0 Pkt | 36 Pkt | 0 Pkt | -45 dBm | 12 V |
1719373923 | 0 Pkt | 152 Pkt | 0 Pkt | -44 dBm | 12 V |
1719371957 | 0 Pkt | 28 Pkt | 0 Pkt | -42 dBm | 12 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)