This is the latest recevied telemetry packets stored in our database for station/object F5ZMN-P1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Temp* | RH* | Patm* | Lux.* |
|---|---|---|---|---|---|
| 1790648755 | 4.77 volts | 18.5 C | 80 % | 1015 hPa | 0 % |
| 1790647563 | 4.77 volts | 18.6 C | 80 % | 1015 hPa | 0 % |
| 1790646370 | 4.77 volts | 18.7 C | 80 % | 1016 hPa | 0 % |
| 1790645177 | 4.78 volts | 18.6 C | 80 % | 1017 hPa | 0 % |
| 1790643984 | 4.77 volts | 18.7 C | 80 % | 1017 hPa | 0 % |
| 1790641599 | 4.77 volts | 18.8 C | 79 % | 1017 hPa | 0 % |
| 1790640406 | 4.77 volts | 18.8 C | 79 % | 1017 hPa | 0 % |
| 1790639215 | 4.77 volts | 19 C | 77 % | 1017 hPa | 0 % |
| 1790638022 | 4.77 volts | 19.1 C | 76 % | 1017 hPa | 0 % |
| 1790636829 | 4.77 volts | 19.1 C | 78 % | 1017 hPa | 0 % |
| 1790635636 | 4.75 volts | 19 C | 76 % | 1017 hPa | 0 % |
| 1790633263 | 4.75 volts | 19.6 C | 75 % | 1017 hPa | 0 % |
| 1790632057 | 4.75 volts | 20.3 C | 74 % | 1018 hPa | 0 % |
| 1790630864 | 4.75 volts | 22.1 C | 70 % | 1017 hPa | 0 % |
| 1790629672 | 4.75 volts | 22.4 C | 67 % | 1016 hPa | 0 % |
| 1790628480 | 4.75 volts | 22.2 C | 67 % | 1016 hPa | 0 % |
| 1790627288 | 4.75 volts | 22.6 C | 65 % | 1015 hPa | 0 % |
| 1790626095 | 4.75 volts | 22.9 C | 64 % | 1015 hPa | 0 % |
| 1790623708 | 4.75 volts | 24 C | 60 % | 1015 hPa | 0 % |
| 1790622515 | 4.75 volts | 24.3 C | 58 % | 1015 hPa | 0 % |
| 1790621323 | 4.75 volts | 24.8 C | 57 % | 1015 hPa | 0 % |
| 1790620131 | 4.75 volts | 25.3 C | 56 % | 1015 hPa | 0 % |
| 1790618938 | 4.75 volts | 26.2 C | 54 % | 1015 hPa | 0 % |
| 1790615361 | 4.73 volts | 28.5 C | 49 % | 1014 hPa | 5 % |
| 1790614168 | 4.73 volts | 29.1 C | 48 % | 1014 hPa | 12 % |
*Used Equation Coefficients:
Vbat: 0, 1, 0
Temp: 0, 1, 0
RH: 0, 1, 0
Patm: 0, 1, 0
Lux.: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)