This is the latest recevied telemetry packets stored in our database for station/object OE3MAG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Temp* |
|---|---|---|---|---|---|
| 1786724931 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 29 C |
| 1786724631 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 29 C |
| 1786724331 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 29 C |
| 1786724031 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 29 C |
| 1786723731 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 29 C |
| 1786723431 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 29 C |
| 1786723131 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 29 C |
| 1786722831 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 29 C |
| 1786722531 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 29 C |
| 1786722231 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 29 C |
| 1786721931 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 29 C |
| 1786721631 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 29 C |
| 1786721331 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 29 C |
| 1786721031 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 29 C |
| 1786720731 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 29 C |
| 1786720431 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 28.5 C |
| 1786720131 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 28.5 C |
| 1786719831 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 28.5 C |
| 1786719531 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 28.5 C |
| 1786719231 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 28.5 C |
| 1786718931 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 28.5 C |
| 1786718631 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 28.5 C |
| 1786718331 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 28.5 C |
| 1786718031 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 28.5 C |
| 1786717731 | 12.45 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 28.5 C |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Temp: 0, 0.5, -64
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)