APRS Track Direct

My position About ☰

reset

XE2OR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2OR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1732310106	0.44 Load	61.76 DegC	64 Mb	6 Pkt	10 Pkt
1732309803	0.63 Load	62.3 DegC	58 Mb	6 Pkt	11 Pkt
1732309503	0.58 Load	61.76 DegC	53 Mb	7 Pkt	11 Pkt
1732309203	0.6 Load	61.22 DegC	53 Mb	7 Pkt	10 Pkt
1732308907	0.55 Load	61.76 DegC	56 Mb	7 Pkt	10 Pkt
1732308603	0.41 Load	62.3 DegC	53 Mb	7 Pkt	11 Pkt
1732308306	0.35 Load	61.22 DegC	65 Mb	7 Pkt	11 Pkt
1732308003	0.44 Load	61.76 DegC	55 Mb	6 Pkt	10 Pkt
1732307703	0.39 Load	61.76 DegC	56 Mb	7 Pkt	10 Pkt
1732307403	0.49 Load	61.76 DegC	56 Mb	7 Pkt	10 Pkt
1732307107	0.63 Load	61.76 DegC	50 Mb	7 Pkt	10 Pkt
1732306803	0.56 Load	61.76 DegC	71 Mb	7 Pkt	10 Pkt
1732306507	0.48 Load	61.22 DegC	67 Mb	6 Pkt	10 Pkt
1732306203	0.43 Load	61.22 DegC	66 Mb	7 Pkt	10 Pkt
1732305903	0.39 Load	61.22 DegC	58 Mb	7 Pkt	11 Pkt
1732305604	0.47 Load	61.76 DegC	56 Mb	7 Pkt	10 Pkt
1732305307	0.41 Load	60.69 DegC	67 Mb	7 Pkt	11 Pkt
1732305004	0.41 Load	61.22 DegC	57 Mb	6 Pkt	10 Pkt
1732304707	0.51 Load	61.22 DegC	57 Mb	8 Pkt	11 Pkt
1732304403	0.56 Load	61.22 DegC	57 Mb	7 Pkt	10 Pkt
1732304103	0.53 Load	61.22 DegC	48 Mb	6 Pkt	11 Pkt
1732303803	0.43 Load	61.22 DegC	50 Mb	6 Pkt	10 Pkt
1732303506	0.35 Load	61.22 DegC	59 Mb	7 Pkt	11 Pkt
1732303203	0.38 Load	60.69 DegC	59 Mb	6 Pkt	11 Pkt
1732302906	0.44 Load	60.69 DegC	58 Mb	7 Pkt	11 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)