This is the latest recevied telemetry packets stored in our database for station/object KNAPPA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732306262 | 14.22 | 2.98 | 14.3 | 2.73 | 69 |
| 1732305603 | 14.24 | 5.18 | 14.37 | 4.57 | 69 |
| 1732305302 | 14.22 | 1.97 | 14.23 | 1.96 | 69 |
| 1732304642 | 14.26 | 1.57 | 14.28 | 1.52 | 69 |
| 1732303982 | 14.33 | 5.36 | 14.33 | 4.85 | 69 |
| 1732303322 | 14.19 | 2.09 | 14.2 | 2.08 | 69 |
| 1732302662 | 14.26 | 1.36 | 14.18 | 1.39 | 69 |
| 1732302003 | 14.26 | 1.85 | 14.19 | 1.96 | 69 |
| 1732301702 | 14.11 | 1.55 | 14.25 | 1.57 | 69 |
| 1732301042 | 14.11 | 1.82 | 14.21 | 1.82 | 69 |
| 1732300382 | 14.17 | 1.5 | 14.19 | 1.5 | 69 |
| 1732299722 | 14.11 | 1.21 | 14.19 | 1.23 | 70 |
| 1732299062 | 50.35 | 4.83 | 49.51 | 4.95 | 70 |
| 1732298403 | 56.13 | 7.66 | 51.71 | 4.22 | 70 |
| 1732298102 | 54.79 | 1.36 | 53.74 | 3.82 | 70 |
| 1732297442 | 53.87 | 5.33 | 52.62 | 2.95 | 69 |
| 1732296782 | 55.61 | 4.2 | 54.06 | 3.24 | 69 |
| 1732296122 | 53.75 | 6.7 | 55.88 | 4.22 | 69 |
| 1732295462 | 55.34 | 3.14 | 54.24 | 2.93 | 68 |
| 1732294803 | 14.32 | 0.65 | 14.51 | 0.65 | 68 |
| 1732294502 | 14.26 | 0.56 | 14.52 | 0.57 | 68 |
| 1732293842 | 14.31 | 0.59 | 14.5 | 0.6 | 68 |
| 1732293181 | 14.25 | 0.5 | 14.51 | 0.53 | 68 |
| 1732292522 | 14.25 | 0.48 | 14.51 | 0.53 | 68 |
| 1732291862 | 14.17 | 0.39 | 14.46 | 0.4 | 68 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)