APRS Track Direct

My position About ☰

reset

SR8WXB-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8WXB-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Tx10min*	Digi10min*	Tempre*
1836274343	13 Pkt	3 Pkt	1 Pkt	32.5 DegC
1836274199	10 Pkt	5 Pkt	1 Pkt	32.5 DegC
1762345739	18 Pkt	4 Pkt	2 Pkt	31 DegC
1762345139	12 Pkt	4 Pkt	0 Pkt	31 DegC
1762344533	14 Pkt	3 Pkt	2 Pkt	31 DegC
1762343932	17 Pkt	5 Pkt	2 Pkt	31 DegC
1762343329	25 Pkt	4 Pkt	2 Pkt	31 DegC
1762342729	16 Pkt	5 Pkt	2 Pkt	31 DegC
1762342126	46 Pkt	4 Pkt	2 Pkt	31 DegC
1762341526	29 Pkt	5 Pkt	2 Pkt	31 DegC
1762340923	19 Pkt	8 Pkt	2 Pkt	31 DegC
1762340311	21 Pkt	5 Pkt	2 Pkt	30.5 DegC
1762339709	32 Pkt	5 Pkt	3 Pkt	30.5 DegC
1762339109	14 Pkt	5 Pkt	2 Pkt	30.5 DegC
1762338506	17 Pkt	5 Pkt	3 Pkt	30.5 DegC
1762337906	29 Pkt	12 Pkt	9 Pkt	30.5 DegC
1762337303	25 Pkt	10 Pkt	7 Pkt	30.5 DegC
1762336097	30 Pkt	7 Pkt	5 Pkt	30 DegC
1762335497	14 Pkt	5 Pkt	2 Pkt	30 DegC
1762334900	12 Pkt	4 Pkt	2 Pkt	30 DegC
1762334294	23 Pkt	5 Pkt	2 Pkt	30 DegC
1762333692	13 Pkt	4 Pkt	2 Pkt	30 DegC
1762333091	21 Pkt	5 Pkt	2 Pkt	29.5 DegC
1762332488	19 Pkt	3 Pkt	2 Pkt	29.5 DegC
1762331888	13 Pkt	5 Pkt	2 Pkt	29.5 DegC

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

HostTx10m: 0, 1, 0

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)