This is the latest recevied telemetry packets stored in our database for station/object HS3EKL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1786797132 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1786796218 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1786795304 | 0 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1786794390 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1786793476 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1786792562 | 0 Pkt | 1 Pkt | 0 Pkt | -80 dBm | 0 % |
| 1786791648 | 0 Pkt | 1 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1786790734 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1786789820 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1786788903 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1786787990 | 0 Pkt | 1 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1786787076 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1786786159 | 12 Pkt | 1 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1786785242 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1786784328 | 16 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1786783412 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1786782498 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1786781584 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1786780670 | 0 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1786779756 | 0 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 0 % |
| 1786778842 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1786777929 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1786777014 | 0 Pkt | 3 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1786776100 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1786775186 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)