APRS Track Direct

My position About ☰

reset

9M2ARO-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M2ARO-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732477235	2 Pkt	0 Pkt	-48 dBm	12.49 V
1732475410	3 Pkt	0 Pkt	-43 dBm	12.49 V
1732473585	2 Pkt	0 Pkt	-46 dBm	12.49 V
1732471759	3 Pkt	0 Pkt	-47 dBm	12.51 V
1732469934	2 Pkt	0 Pkt	-46 dBm	12.49 V
1732468108	0 Pkt	0 Pkt	-43 dBm	12.49 V
1732467350	3 Pkt	5 Pkt	-37 dBm	12.49 V
1732465524	3 Pkt	4 Pkt	-38 dBm	12.51 V
1732463696	2 Pkt	4 Pkt	-35 dBm	12.51 V
1732461871	5 Pkt	4 Pkt	-36 dBm	12.55 V
1732460043	4 Pkt	0 Pkt	-37 dBm	12.49 V
1732458217	2 Pkt	0 Pkt	-34 dBm	12.51 V
1732456391	2 Pkt	0 Pkt	-36 dBm	12.49 V
1732454566	5 Pkt	0 Pkt	-34 dBm	12.51 V
1732452739	2 Pkt	0 Pkt	-35 dBm	12.51 V
1732450914	6 Pkt	0 Pkt	-34 dBm	12.51 V
1732449086	8 Pkt	0 Pkt	-36 dBm	12.51 V
1732447258	3 Pkt	0 Pkt	-35 dBm	12.51 V
1732445432	6 Pkt	0 Pkt	-37 dBm	12.51 V
1732443604	12 Pkt	0 Pkt	-34 dBm	12.51 V
1732441776	2 Pkt	0 Pkt	-35 dBm	12.51 V
1732439951	3 Pkt	0 Pkt	-34 dBm	12.51 V
1732438124	2 Pkt	0 Pkt	-35 dBm	12.55 V
1732436298	4 Pkt	0 Pkt	-37 dBm	12.51 V
1732434472	3 Pkt	0 Pkt	-35 dBm	12.55 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)