APRS Track Direct

My position About ☰

reset

9M4BCW-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M4BCW-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1758208350	8 Pkt	9 Pkt	3 Pkt	-35 dBm	5.31 V
1758207425	7 Pkt	8 Pkt	12 Pkt	-35 dBm	5.29 V
1758206499	9 Pkt	6 Pkt	7 Pkt	-35 dBm	5.31 V
1758205574	61 Pkt	10 Pkt	10 Pkt	-41 dBm	5.31 V
1758204644	29 Pkt	11 Pkt	9 Pkt	-40 dBm	5.31 V
1758203716	14 Pkt	6 Pkt	8 Pkt	-40 dBm	5.31 V
1758202789	9 Pkt	6 Pkt	19 Pkt	-42 dBm	5.31 V
1758201865	11 Pkt	8 Pkt	16 Pkt	-39 dBm	5.31 V
1758200939	13 Pkt	8 Pkt	17 Pkt	-40 dBm	5.31 V
1758200013	21 Pkt	18 Pkt	16 Pkt	-40 dBm	5.31 V
1758198164	0 Pkt	1 Pkt	0 Pkt	-40 dBm	5.31 V
1758197224	8 Pkt	24 Pkt	8 Pkt	-40 dBm	5.31 V
1758196299	4 Pkt	33 Pkt	7 Pkt	-40 dBm	5.29 V
1758195373	5 Pkt	20 Pkt	5 Pkt	-40 dBm	5.29 V
1758194447	7 Pkt	31 Pkt	8 Pkt	-41 dBm	5.31 V
1758193518	36 Pkt	17 Pkt	12 Pkt	-40 dBm	5.31 V
1758192588	55 Pkt	10 Pkt	6 Pkt	-40 dBm	5.31 V
1758191660	19 Pkt	9 Pkt	2 Pkt	-40 dBm	5.31 V
1758190734	3 Pkt	10 Pkt	6 Pkt	-41 dBm	5.31 V
1758189809	8 Pkt	14 Pkt	6 Pkt	-41 dBm	5.31 V
1758188884	9 Pkt	10 Pkt	3 Pkt	-41 dBm	5.31 V
1758187957	31 Pkt	13 Pkt	6 Pkt	-40 dBm	5.31 V
1758187030	5 Pkt	10 Pkt	0 Pkt	-41 dBm	5.29 V
1758186104	13 Pkt	14 Pkt	20 Pkt	-41 dBm	5.31 V
1758185178	14 Pkt	10 Pkt	3 Pkt	-36 dBm	5.31 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)