APRS Track Direct

My position About ☰

reset

SQ8JIU-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ8JIU-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10m*	Dg1h*	Eff1h*	Temp*
1732306961	12.6 Volt	38 Pkt	0 Pkt	66 Pcnt	5 C
1732306361	12.6 Volt	41 Pkt	1 Pkt	66 Pcnt	5 C
1732305761	12.6 Volt	31 Pkt	0 Pkt	67 Pcnt	5 C
1732305161	12.6 Volt	41 Pkt	1 Pkt	67 Pcnt	5 C
1732304561	12.6 Volt	47 Pkt	0 Pkt	67 Pcnt	5 C
1732303961	12.6 Volt	31 Pkt	0 Pkt	66 Pcnt	5 C
1732303361	12.6 Volt	40 Pkt	1 Pkt	70 Pcnt	5 C
1732302761	12.6 Volt	32 Pkt	0 Pkt	72 Pcnt	5 C
1732302163	12.6 Volt	19 Pkt	0 Pkt	73 Pcnt	5 C
1732301562	12.6 Volt	28 Pkt	1 Pkt	73 Pcnt	5 C
1732300962	12.6 Volt	30 Pkt	0 Pkt	75 Pcnt	5 C
1732300362	12.6 Volt	27 Pkt	0 Pkt	78 Pcnt	5 C
1732299762	12.6 Volt	30 Pkt	1 Pkt	75 Pcnt	5 C
1732299162	12.6 Volt	37 Pkt	0 Pkt	75 Pcnt	5 C
1732298562	12.6 Volt	22 Pkt	0 Pkt	71 Pcnt	5 C
1732297962	12.6 Volt	30 Pkt	1 Pkt	68 Pcnt	5 C
1732297362	12.6 Volt	40 Pkt	0 Pkt	65 Pcnt	5 C
1732296762	12.6 Volt	21 Pkt	0 Pkt	64 Pcnt	5 C
1732296162	12.6 Volt	30 Pkt	1 Pkt	63 Pcnt	5 C
1732295562	12.6 Volt	20 Pkt	0 Pkt	62 Pcnt	5 C
1732294962	12.6 Volt	18 Pkt	0 Pkt	62 Pcnt	5 C
1732294362	12.6 Volt	26 Pkt	1 Pkt	64 Pcnt	5 C
1732293762	12.6 Volt	29 Pkt	0 Pkt	65 Pcnt	5 C
1732293162	12.6 Volt	12 Pkt	0 Pkt	67 Pcnt	5 C
1732292562	12.6 Volt	26 Pkt	1 Pkt	66 Pcnt	5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx10m: 0, 1, 0

Dg1h: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 5

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)