This is the latest recevied telemetry packets stored in our database for station/object DL3DCW. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Leistung* | Ladezustand* | Bezugspreis* | Value4* | Value5* |
---|---|---|---|---|---|
1719657153 | 8 kW | 100 % | 18.4 ct/kWh | 0 | 0 |
1719656553 | 7.9 kW | 100 % | 18.4 ct/kWh | 0 | 0 |
1719655953 | 7.8 kW | 100 % | 18.4 ct/kWh | 0 | 0 |
1719655353 | 7.7 kW | 100 % | 18.4 ct/kWh | 0 | 0 |
1719654753 | 6.9 kW | 100 % | 18.4 ct/kWh | 0 | 0 |
1719654153 | 6.9 kW | 100 % | 18.4 ct/kWh | 0 | 0 |
1719653553 | 6.7 kW | 100 % | 18.4 ct/kWh | 0 | 0 |
1719652953 | 6.5 kW | 100 % | 18.4 ct/kWh | 0 | 0 |
1719652353 | 6.6 kW | 100 % | 18.4 ct/kWh | 0 | 0 |
1719651753 | 6.7 kW | 100 % | 18.4 ct/kWh | 0 | 0 |
1719651153 | 6.6 kW | 100 % | 19 ct/kWh | 0 | 0 |
1719650553 | 4.9 kW | 100 % | 19 ct/kWh | 0 | 0 |
1719649953 | 6.5 kW | 100 % | 19 ct/kWh | 0 | 0 |
1719649353 | 6.6 kW | 100 % | 19 ct/kWh | 0 | 0 |
1719648753 | 4.9 kW | 100 % | 19 ct/kWh | 0 | 0 |
1719648153 | 6.7 kW | 100 % | 19 ct/kWh | 0 | 0 |
1719647553 | 5 kW | 100 % | 21.9 ct/kWh | 0 | 0 |
1719646953 | 6.7 kW | 100 % | 21.9 ct/kWh | 0 | 0 |
1719646352 | 6.5 kW | 100 % | 21.9 ct/kWh | 0 | 0 |
1719645752 | 6.4 kW | 100 % | 21.9 ct/kWh | 0 | 0 |
1719645152 | 5.7 kW | 100 % | 21.9 ct/kWh | 0 | 0 |
1719644552 | 6 kW | 100 % | 21.9 ct/kWh | 0 | 0 |
1719643952 | 6.1 kW | 100 % | 26.3 ct/kWh | 0 | 0 |
1719643352 | 5.3 kW | 100 % | 26.3 ct/kWh | 0 | 0 |
1719642752 | 5.5 kW | 100 % | 26.3 ct/kWh | 0 | 0 |
*Used Equation Coefficients:
Leistung: 0, 0.1, 0
Ladezustand: 0, 1, 0
Bezugspreis: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)