APRS Track Direct

My position About ☰

reset

TA5LVC-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA5LVC-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPackets*	TxPackets*	RSSI*	Voltage*
1790651110	42 Pkts	39 Pkts	-73 dBm	3.3 V
1790650210	32 Pkts	29 Pkts	-73 dBm	3.3 V
1790649310	18 Pkts	17 Pkts	-73 dBm	3.3 V
1790648410	9 Pkts	9 Pkts	-72 dBm	3.3 V
1790647510	0 Pkts	0 Pkts	-72 dBm	3.3 V
1790647277	169 Pkts	143 Pkts	-72 dBm	3.3 V
1790646377	161 Pkts	136 Pkts	-73 dBm	3.3 V
1790645477	145 Pkts	121 Pkts	-70 dBm	3.3 V
1790644577	144 Pkts	120 Pkts	-70 dBm	3.3 V
1790643677	134 Pkts	112 Pkts	-71 dBm	3.3 V
1790642777	124 Pkts	102 Pkts	-72 dBm	3.3 V
1790641877	117 Pkts	96 Pkts	-71 dBm	3.3 V
1790640977	108 Pkts	88 Pkts	-72 dBm	3.3 V
1790640077	98 Pkts	80 Pkts	-72 dBm	3.3 V
1790639177	87 Pkts	71 Pkts	-74 dBm	3.3 V
1790638277	75 Pkts	62 Pkts	-73 dBm	3.3 V
1790637377	72 Pkts	59 Pkts	-74 dBm	3.3 V
1790636477	66 Pkts	54 Pkts	-74 dBm	3.3 V
1790635577	55 Pkts	45 Pkts	-73 dBm	3.3 V
1790634677	40 Pkts	32 Pkts	-73 dBm	3.3 V
1790633777	36 Pkts	29 Pkts	-72 dBm	3.3 V
1790632877	22 Pkts	18 Pkts	-73 dBm	3.3 V
1790631977	11 Pkts	11 Pkts	-72 dBm	3.3 V
1790631077	0 Pkts	0 Pkts	-74 dBm	3.3 V
1790630176	8 Pkts	220 Pkts	-73 dBm	3.3 V

*Used Equation Coefficients:

RxPackets: 0, 1, 0

TxPackets: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, 1, -200

Voltage: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)