This is the latest recevied telemetry packets stored in our database for station/object E20ZNR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1732292076 | 15 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1732291151 | 19 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1732290226 | 14 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1732289302 | 16 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1732288377 | 18 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1732287451 | 10 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1732286527 | 15 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1732285602 | 15 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1732284677 | 22 Pkt | 1 Pkt | 1 Pkt | -75 dBm | 0 % |
| 1732283752 | 16 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1732282828 | 19 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1732281902 | 16 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1732280978 | 15 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1732280053 | 15 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 0 % |
| 1732279128 | 19 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 0 % |
| 1732278203 | 15 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 0 % |
| 1732277278 | 16 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 0 % |
| 1732276353 | 20 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 0 % |
| 1732275427 | 15 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1732274503 | 21 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 0 % |
| 1732273579 | 40 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 0 % |
| 1732272653 | 23 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 2 % |
| 1732271716 | 14 Pkt | 0 Pkt | 0 Pkt | -74 dBm | 12 % |
| 1732269895 | 21 Pkt | 0 Pkt | 0 Pkt | -76 dBm | 34 % |
| 1732268971 | 23 Pkt | 0 Pkt | 0 Pkt | -75 dBm | 41 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)