This is the latest recevied telemetry packets stored in our database for station/object DB0ZEA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732292360 | 25.4 deg C | 39.8 % | 0 | 0 | 0 |
| 1732292027 | 25.1 deg C | 39.5 % | 0 | 0 | 0 |
| 1732291127 | 24.5 deg C | 39.5 % | 0 | 0 | 0 |
| 1732290227 | 24.3 deg C | 38.9 % | 0 | 0 | 0 |
| 1732289327 | 24.3 deg C | 38.9 % | 0 | 0 | 0 |
| 1732288426 | 24.3 deg C | 39 % | 0 | 0 | 0 |
| 1732287526 | 24.3 deg C | 39 % | 0 | 0 | 0 |
| 1732286626 | 24.3 deg C | 38.9 % | 0 | 0 | 0 |
| 1732285726 | 24.3 deg C | 38.9 % | 0 | 0 | 0 |
| 1732284826 | 24.3 deg C | 38.9 % | 0 | 0 | 0 |
| 1732283926 | 24.3 deg C | 38.8 % | 0 | 0 | 0 |
| 1732283026 | 24.3 deg C | 38.9 % | 0 | 0 | 0 |
| 1732282126 | 24.3 deg C | 39.1 % | 0 | 0 | 0 |
| 1732281226 | 24.3 deg C | 39.1 % | 0 | 0 | 0 |
| 1732280326 | 24.3 deg C | 39.1 % | 0 | 0 | 0 |
| 1732279996 | 24.3 deg C | 39.1 % | 0 | 0 | 0 |
| 1732279096 | 24.3 deg C | 39.1 % | 0 | 0 | 0 |
| 1732278196 | 24.2 deg C | 39.1 % | 0 | 0 | 0 |
| 1732277297 | 24.2 deg C | 39 % | 0 | 0 | 0 |
| 1732276396 | 24.2 deg C | 39 % | 0 | 0 | 0 |
| 1732275496 | 24.2 deg C | 39 % | 0 | 0 | 0 |
| 1732274595 | 24.1 deg C | 38.9 % | 0 | 0 | 0 |
| 1732273695 | 24.2 deg C | 38.8 % | 0 | 0 | 0 |
| 1732272795 | 24.2 deg C | 39 % | 0 | 0 | 0 |
| 1732271895 | 24.2 deg C | 39 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)