APRS Track Direct

My position About ☰

reset

EA4GLO-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA4GLO-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxPkts*	Heard*	RSSI*	SNR*	Vbat*
1790644269	21 Pkt	17 Stn	-113 dBm	-14.6 dB	4.9 V
1790643369	20 Pkt	18 Stn	-113 dBm	-15.6 dB	4.9 V
1790642469	18 Pkt	16 Stn	-105 dBm	-6.4 dB	4.9 V
1790641569	16 Pkt	15 Stn	-116 dBm	-18 dB	4.9 V
1790640669	12 Pkt	18 Stn	-106 dBm	-8 dB	4.9 V
1790639769	19 Pkt	22 Stn	-114 dBm	-19.4 dB	4.7 V
1790638869	15 Pkt	22 Stn	-119 dBm	-20 dB	4.9 V
1790637969	22 Pkt	22 Stn	-116 dBm	-17 dB	4.9 V
1790637069	25 Pkt	20 Stn	-104 dBm	-5.8 dB	4.9 V
1790636169	18 Pkt	19 Stn	-114 dBm	-16 dB	4.9 V
1790635269	22 Pkt	20 Stn	-120 dBm	-20 dB	4.9 V
1790634369	18 Pkt	14 Stn	-115 dBm	-16.8 dB	4.9 V
1790633469	15 Pkt	12 Stn	-120 dBm	-20 dB	4.9 V
1790632569	14 Pkt	11 Stn	-116 dBm	-17.6 dB	4.9 V
1790631669	13 Pkt	15 Stn	-111 dBm	-12.8 dB	4.9 V
1790630769	18 Pkt	18 Stn	-116 dBm	-18 dB	4.9 V
1790629869	20 Pkt	19 Stn	-119 dBm	-20 dB	4.9 V
1790628969	22 Pkt	18 Stn	-116 dBm	-17.8 dB	4.9 V
1790628069	21 Pkt	20 Stn	-118 dBm	-19.6 dB	4.9 V
1790627169	19 Pkt	20 Stn	-115 dBm	-17.8 dB	4.9 V
1790626269	23 Pkt	15 Stn	-106 dBm	-8 dB	4.9 V
1790625369	13 Pkt	10 Stn	-115 dBm	-18 dB	4.9 V
1790624469	0 Pkt	0 Stn	0 dBm	0 dB	4.9 V
1790615094	18 Pkt	12 Stn	-119 dBm	-20 dB	4.9 V
1790613848	255 Pkt	13 Stn	-114 dBm	-15.8 dB	4.9 V

*Used Equation Coefficients:

RxPkts: 0, 1, 0

Heard: 0, 1, 0

RSSI: 0, 1, -150

SNR: 0, 0.2, -20

Vbat: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)