APRS Track Direct

My position About ☰

reset

IR2ZYA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2ZYA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff*
1786722878	43 Pkt	360 Pkt	0.76 Pcnt	77 Pcnt
1786722578	51 Pkt	370 Pkt	0.76 Pcnt	77 Pcnt
1786722278	61 Pkt	380 Pkt	0.76 Pcnt	77 Pcnt
1786721978	52 Pkt	380 Pkt	0.76 Pcnt	77 Pcnt
1786721678	47 Pkt	380 Pkt	0.76 Pcnt	77 Pcnt
1786721378	64 Pkt	380 Pkt	0.76 Pcnt	77 Pcnt
1786721078	63 Pkt	390 Pkt	0.76 Pcnt	77 Pcnt
1786720778	64 Pkt	390 Pkt	0.76 Pcnt	77 Pcnt
1786720478	62 Pkt	390 Pkt	0.76 Pcnt	77 Pcnt
1786720178	52 Pkt	390 Pkt	0.76 Pcnt	77 Pcnt
1786719878	60 Pkt	380 Pkt	0.76 Pcnt	77 Pcnt
1786719578	68 Pkt	390 Pkt	0.76 Pcnt	77 Pcnt
1786719278	56 Pkt	390 Pkt	0.76 Pcnt	77 Pcnt
1786718978	58 Pkt	400 Pkt	0.76 Pcnt	77 Pcnt
1786718678	62 Pkt	420 Pkt	0.76 Pcnt	77 Pcnt
1786718378	58 Pkt	420 Pkt	0.76 Pcnt	77 Pcnt
1786718078	60 Pkt	420 Pkt	0.76 Pcnt	77 Pcnt
1786717778	72 Pkt	430 Pkt	0.76 Pcnt	77 Pcnt
1786717478	64 Pkt	420 Pkt	0.76 Pcnt	77 Pcnt
1786717178	58 Pkt	430 Pkt	0.76 Pcnt	77 Pcnt
1786716878	52 Pkt	430 Pkt	0.76 Pcnt	77 Pcnt
1786716578	59 Pkt	460 Pkt	0.76 Pcnt	77 Pcnt
1786716278	71 Pkt	470 Pkt	0.76 Pcnt	77 Pcnt
1786715978	68 Pkt	470 Pkt	0.76 Pcnt	77 Pcnt
1786715678	72 Pkt	470 Pkt	0.76 Pcnt	77 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)