This is the latest recevied telemetry packets stored in our database for station/object IW1QAF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753649388 | 47 Pkt/10m | 33 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1753648167 | 47 Pkt/10m | 35 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1753646964 | 47 Pkt/10m | 32 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1753645759 | 57 Pkt/10m | 50 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1753644556 | 77 Pkt/10m | 66 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1753643352 | 96 Pkt/10m | 91 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1753642148 | 70 Pkt/10m | 56 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1753640944 | 63 Pkt/10m | 48 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1753639739 | 46 Pkt/10m | 36 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1753638535 | 42 Pkt/10m | 27 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1753637331 | 52 Pkt/10m | 36 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1753636127 | 58 Pkt/10m | 43 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1753634923 | 53 Pkt/10m | 40 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1753633719 | 55 Pkt/10m | 46 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1753632515 | 49 Pkt/10m | 31 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1753631311 | 69 Pkt/10m | 56 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1753630107 | 51 Pkt/10m | 45 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1753628907 | 50 Pkt/10m | 46 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1753627694 | 52 Pkt/10m | 39 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1753626490 | 64 Pkt/10m | 57 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1753625286 | 50 Pkt/10m | 38 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1753624082 | 50 Pkt/10m | 42 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1753622878 | 51 Pkt/10m | 40 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1753621674 | 56 Pkt/10m | 33 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1753620470 | 48 Pkt/10m | 35 Pkt/10m | 4.92 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)