APRS Track Direct

My position About ☰

reset

SR5E Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5E. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	CPU Temp*	CPU Usage*	Temp DS1*	Temp DS2*
1744972203	55 Deg.C	2 %	31.1 Deg.C	31.1 Deg.C
1744971606	54 Deg.C	2 %	32.1 Deg.C	32.1 Deg.C
1744971003	54 Deg.C	2 %	34.1 Deg.C	34.1 Deg.C
1744970406	53 Deg.C	2 %	35.1 Deg.C	35.1 Deg.C
1744969803	54 Deg.C	2 %	38.3 Deg.C	38.3 Deg.C
1744969206	55 Deg.C	2 %	37.4 Deg.C	37.4 Deg.C
1744968602	54 Deg.C	2 %	30.1 Deg.C	30.1 Deg.C
1744968003	53 Deg.C	2 %	30.1 Deg.C	30.1 Deg.C
1744967407	54 Deg.C	2 %	30.1 Deg.C	30.1 Deg.C
1744966803	54 Deg.C	2 %	30.7 Deg.C	30.7 Deg.C
1744966207	53 Deg.C	2 %	30.1 Deg.C	30.1 Deg.C
1744965603	53 Deg.C	2 %	29.5 Deg.C	29.5 Deg.C
1744965006	53 Deg.C	2 %	29.2 Deg.C	29.2 Deg.C
1744964403	52 Deg.C	2 %	29.6 Deg.C	29.6 Deg.C
1744963803	54 Deg.C	2 %	29.7 Deg.C	29.7 Deg.C
1744963206	54 Deg.C	2 %	29.7 Deg.C	29.7 Deg.C
1744962603	54 Deg.C	2 %	29.9 Deg.C	29.9 Deg.C
1744962006	54 Deg.C	2 %	29.6 Deg.C	29.6 Deg.C
1744961403	53 Deg.C	2 %	29.7 Deg.C	29.7 Deg.C
1744960806	53 Deg.C	2 %	29.6 Deg.C	29.6 Deg.C
1744960203	53 Deg.C	2 %	29.5 Deg.C	29.5 Deg.C
1744959603	52 Deg.C	2 %	29.4 Deg.C	29.4 Deg.C
1744959006	52 Deg.C	2 %	29.6 Deg.C	29.6 Deg.C
1744958403	53 Deg.C	2 %	29.1 Deg.C	29.1 Deg.C
1744957807	53 Deg.C	2 %	29.5 Deg.C	29.5 Deg.C

*Used Equation Coefficients:

CPU Temp: 0, 0.1, 0

CPU Usage: 0, 1, 0

Temp DS1: 0, 0.1, 0

Temp DS2: 0, 0.1, 0

Value5: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)