This is the latest recevied telemetry packets stored in our database for station/object BH2WAV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU-Used* | CPU-Temp* | MEM-Used* | UpSpeed* | DownSpeed* |
|---|---|---|---|---|---|
| 1744969804 | 29.43 % | 37 C | 25 % | 0.24 KBps | 0.05 KBps |
| 1744968902 | 15.75 % | 37 C | 25 % | 0 KBps | 0 KBps |
| 1744968003 | 31.42 % | 36 C | 25 % | 0.87 KBps | 0.6 KBps |
| 1744967102 | 2.99 % | 36 C | 25 % | 0.24 KBps | 0.41 KBps |
| 1744966205 | 1.74 % | 36 C | 25 % | 1.7 KBps | 9.27 KBps |
| 1744965305 | 34.41 % | 36 C | 25 % | 0.26 KBps | 0.38 KBps |
| 1744964405 | 35.25 % | 35 C | 25 % | 0.25 KBps | 0.08 KBps |
| 1744963502 | 0 % | 36 C | 25 % | 0.32 KBps | 0.61 KBps |
| 1744962604 | 12 % | 37 C | 25 % | 0.53 KBps | 10.88 KBps |
| 1744961702 | 12.16 % | 35 C | 25 % | 0.42 KBps | 0.81 KBps |
| 1744960805 | 11.25 % | 36 C | 25 % | 0.75 KBps | 0.47 KBps |
| 1744959902 | 7.25 % | 36 C | 25 % | 0.25 KBps | 0.35 KBps |
| 1744959005 | 2 % | 35 C | 25 % | 1.81 KBps | 1 KBps |
| 1744958102 | 4.98 % | 35 C | 25 % | 0.91 KBps | 0.48 KBps |
| 1744957202 | 36.66 % | 35 C | 25 % | 37.81 KBps | 5.94 KBps |
| 1744956303 | 34.25 % | 35 C | 26 % | 0.36 KBps | 0.36 KBps |
| 1744955402 | 29.93 % | 35 C | 26 % | 0.34 KBps | 0.6 KBps |
| 1744954502 | 24.44 % | 35 C | 26 % | 0.41 KBps | 0.34 KBps |
| 1744953605 | 6.23 % | 34 C | 26 % | 0.65 KBps | 12.56 KBps |
| 1744952705 | 3.5 % | 35 C | 26 % | 0.03 KBps | 0.03 KBps |
| 1744951802 | 35.32 % | 35 C | 26 % | 0.23 KBps | 0.33 KBps |
| 1744950906 | 34.41 % | 34 C | 26 % | 2.29 KBps | 0.29 KBps |
| 1744950007 | 36.57 % | 34 C | 26 % | 2.31 KBps | 0.03 KBps |
| 1744949104 | 33.92 % | 34 C | 26 % | 0 KBps | 0 KBps |
| 1744948205 | 19.95 % | 34 C | 26 % | 0.04 KBps | 0.05 KBps |
*Used Equation Coefficients:
CPU-Used: 0, 1, 0
CPU-Temp: 0, 1, 0
MEM-Used: 0, 1, 0
UpSpeed: 0, 1, 0
DownSpeed: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)