This is the latest recevied telemetry packets stored in our database for station/object E25PHR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Atm* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794917283 | 28 C | 1012 mBar | 0 | 0 | 0 |
| 1794916411 | 29 C | 1012 mBar | 0 | 0 | 0 |
| 1794915598 | 31 C | 1012 mBar | 0 | 0 | 0 |
| 1794914754 | 34 C | 1012 mBar | 0 | 0 | 0 |
| 1794914156 | 34 C | 1012 mBar | 0 | 0 | 0 |
| 1794913562 | 34 C | 1011 mBar | 0 | 0 | 0 |
| 1794912603 | 34 C | 1011 mBar | 0 | 0 | 0 |
| 1794912007 | 34 C | 1011 mBar | 0 | 0 | 0 |
| 1794911106 | 35 C | 1011 mBar | 0 | 0 | 0 |
| 1794910409 | 35 C | 1011 mBar | 0 | 0 | 0 |
| 1794909583 | 35 C | 1010 mBar | 0 | 0 | 0 |
| 1794908928 | 35 C | 1010 mBar | 0 | 0 | 0 |
| 1794908119 | 35 C | 1010 mBar | 0 | 0 | 0 |
| 1794907692 | 35 C | 1010 mBar | 0 | 0 | 0 |
| 1794907108 | 35 C | 1010 mBar | 0 | 0 | 0 |
| 1794906477 | 35 C | 1010 mBar | 0 | 0 | 0 |
| 1794905331 | 35 C | 1010 mBar | 0 | 0 | 0 |
| 1794904116 | 35 C | 1010 mBar | 0 | 0 | 0 |
| 1794902901 | 34 C | 1010 mBar | 0 | 0 | 0 |
| 1794901672 | 35 C | 1010 mBar | 0 | 0 | 0 |
| 1794901048 | 34 C | 1010 mBar | 0 | 0 | 0 |
| 1794900425 | 34 C | 1010 mBar | 0 | 0 | 0 |
| 1794899915 | 34 C | 1011 mBar | 0 | 0 | 0 |
| 1794898557 | 34 C | 1011 mBar | 0 | 0 | 0 |
| 1794897152 | 34 C | 1011 mBar | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Atm: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)