This is the latest recevied telemetry packets stored in our database for station/object DC4HF-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732286785 | 236 | 0 | 7271 | 3090 | 4548 |
| 1732285455 | 236 | 0 | 7261 | 3064 | 4463 |
| 1732284545 | 236 | 0 | 7264 | 3099 | 4441 |
| 1732283576 | 236 | 5673 | 7559 | 3084 | 4413 |
| 1732282675 | 236 | 0 | 7263 | 3109 | 4386 |
| 1732281769 | 236 | 0 | 7268 | 3148 | 4333 |
| 1732280865 | 236 | 0 | 7267 | 3190 | 4271 |
| 1732279955 | 236 | 0 | 7266 | 3180 | 4313 |
| 1732279045 | 236 | 0 | 7272 | 3198 | 4335 |
| 1732278135 | 236 | 0 | 7270 | 3206 | 4367 |
| 1732277225 | 236 | 0 | 7273 | 3172 | 4565 |
| 1732275675 | 236 | 0 | 7253 | 2855 | 4516 |
| 1732274765 | 236 | 0 | 7254 | 2827 | 4561 |
| 1732273855 | 236 | 0 | 7261 | 2778 | 4596 |
| 1732272950 | 236 | 0 | 7259 | 2782 | 4593 |
| 1732272045 | 236 | 0 | 7257 | 2787 | 4574 |
| 1732271135 | 236 | 0 | 7257 | 2790 | 4564 |
| 1732270223 | 236 | 0 | 7261 | 2784 | 4581 |
| 1732269315 | 236 | 0 | 7258 | 2778 | 4577 |
| 1732268405 | 236 | 0 | 7263 | 2775 | 4554 |
| 1732267495 | 236 | 0 | 7266 | 2766 | 4572 |
| 1732266590 | 236 | 0 | 7267 | 2744 | 4580 |
| 1732265685 | 236 | 0 | 7261 | 2731 | 4586 |
| 1732264775 | 236 | 0 | 7262 | 2707 | 4607 |
| 1732263861 | 236 | 0 | 7267 | 2686 | 4638 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)