This is the latest recevied telemetry packets stored in our database for station/object YO7MGH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | T ext.* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750134098 | 16.9 °C | 0 | 0 | 0 | 0 |
| 1750133497 | 16.3 °C | 0 | 0 | 0 | 0 |
| 1750132896 | 16.4 °C | 0 | 0 | 0 | 0 |
| 1750132297 | 16.8 °C | 0 | 0 | 0 | 0 |
| 1750131697 | 17.9 °C | 0 | 0 | 0 | 0 |
| 1750131096 | 17.4 °C | 0 | 0 | 0 | 0 |
| 1750130497 | 17.9 °C | 0 | 0 | 0 | 0 |
| 1750129897 | 17.5 °C | 0 | 0 | 0 | 0 |
| 1750129296 | 17.6 °C | 0 | 0 | 0 | 0 |
| 1750128697 | 18 °C | 0 | 0 | 0 | 0 |
| 1750128097 | 17.9 °C | 0 | 0 | 0 | 0 |
| 1750127497 | 18.6 °C | 0 | 0 | 0 | 0 |
| 1750126898 | 18.4 °C | 0 | 0 | 0 | 0 |
| 1750126298 | 18.5 °C | 0 | 0 | 0 | 0 |
| 1750125697 | 18.5 °C | 0 | 0 | 0 | 0 |
| 1750125098 | 19.3 °C | 0 | 0 | 0 | 0 |
| 1750124498 | 19.8 °C | 0 | 0 | 0 | 0 |
| 1750123897 | 19.8 °C | 0 | 0 | 0 | 0 |
| 1750123298 | 19.9 °C | 0 | 0 | 0 | 0 |
| 1750122697 | 19.5 °C | 0 | 0 | 0 | 0 |
| 1750122096 | 19.4 °C | 0 | 0 | 0 | 0 |
| 1750121497 | 19.5 °C | 0 | 0 | 0 | 0 |
| 1750120897 | 19.2 °C | 0 | 0 | 0 | 0 |
| 1750120296 | 18.8 °C | 0 | 0 | 0 | 0 |
| 1750119697 | 18.8 °C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
T ext.: 0, 1, -100
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)